Right Angle Strain Relief for Flat Cables are one of the most popular strain reliefs made. There are 9 sizes available. All of the strain reliefs have a UL description.

Right Angle Strain Reliefs For Round Cables protect your cables in a 90º configuration aligning the cable flush against and parallel to the chassis. They install easily by positioning on the wire, closing, and hand-pressing into the mounting hole.

Bell-Mouth Strain Relief Bushings for Round Cables have four round cable options available for your application requirements. These bell-mouth strain reliefs will fit in two panel sizes - 0.062 or 0.125 inches.

Bell-Mouth Strain Reliefs for Flat Cable have seven flat cable options available for your application requirements. These bell-mouth strain reliefs will fit in two panel sizes - 0.062 or 0.125 inches.

CEE Euro-Style Strain Reliefs for Round Cables have a flexible Button Lock that keeps the Strain Relief attached to the panel during cable removal or replacement. These Strain Reliefs hold cable diameters from 0.300-0.360". The Bushing fits into a round 0.625" hole, and the Button Lock fits into a 0.312" hole alongside it, in panels of 0.125" thick.

Extra-Long Flat Cable Strain Relief Bushings with Flex Protecting Internal Radii offers you two different flat cable sizes. There are 3 panel ranges to snap this into, starting with 0.040 up to 0.100 inches.

Nickel Plated Brass Metric Liquid-Tight Cordgrips provide superior protection of flexible cables. Their nickel plated finish over brass construction gives you excellent corrosion resistance and durability. They are available in sizes M6 thru M50, and will accommodate various cable diameters. They also meet the new European standard EN 50262 version A for metric cordgrips.

HEYCO® Nickel-Plated Brass Liquid-Tight Cordgrips with PG Threads provide superior protection of flexible cables. Their nickel-plated finish over brass construction gives you excellent corrosion resistance and durability. They are available in sizes PG 7 through PG42 and will accommodate various cable diameters.

HEYCO® USR Euro-Style Strain Relief with Captive Screw have an Acetyl Captive Screw which can not be removed from the body during cable removal or replacement. This satisfies European requirements mandating that the Strain Relief device remains attached to the panel. The captive acetyl screw forces the locking flap against the cable, and reinforcing ribs provide extra strength.

Lay-In Strain Relief Bushings for Split Panel Holes will fit round, flat or multiple cables. Wire range from 0.250 inches up to 0.600 inches. This strain relief secures into a square hole that eliminates rotation.

These Liquid-Tight Cordgrips Multi-Hole PG Hubs fit flexible cords for use in clearance or threaded holes. We offer 8 thread sizes with 48 design variations ranging from 2 - 7 holes. They have Nylon 6/6 bodies and TPE sealing glands.

RDD Lockit™ for Round Wire installs with fingertip pressure into an easily punched standard round or RDD strain relief hole. No clumsy hand tools required. Designed with multiple panel locking steps to secure the strain relief into panels up to 0.187". An RDD strain relief mounting hole punch is available. See "Strain Reliefs for Wire/Cables" under "Wiring Management."

Lockit™ Strain Relief Bushings have a three-finger design that securely anchors into chassis as thin as 0.032in (0.80mm) and as thick as 0.157in (4.00mm) for a neat, clean appearance. Five locking steps accommodate a wide range of chassis thicknesses. Their low profile head satisfies design aesthetics.

These Lockit™; Strain Relief Bushings for Round Cables fit a rectangular mounting hole, and self-lock onto the cable independent of insertion into the panel. Thus they can be pre-assembled offline when needed to reduce installed cost.

Metal Strain Reliefs for Round Cables are available in diameters of 0.250 up to 0.343 inch. They are made of steel with zinc plating.

Metric Straight Thru Extra Grip Nylon Liquid-Tight Cordgrips give you easy, time-saving installation on flexible cords in both clearance or threaded holes, and have longer fingers inside to provide an even tighter grip. They are all nylon construction with Buna N Sealing Gland, and are available in the widest range of cable and/or thread sizes available, including 6 threads for cables ranging from 0.065in - 1.260in (1.70mm - 32.00mm) in 12 total sizes. Their ratchet designed Sealing Nut provides superior protection against vibration and a firm grip on the cable, and the integral Sealing Ring ensures a superior seal at the mounting locations every time.

Multi-Hole Cordgrips with NPT Hubs fit flexible cords, and are for use in clearance or threaded holes. We offer 5 sizes with 50 design variations ranging from 2 - 7 holes. They have Nylon 6/6 bodies and TPE sealing glands.

These Liquid-Tight Cordgrips Multi-Hole with Metric Hubs fit flexible cords, and are for use in clearance or Metric threaded holes. We offer 5 thread sizes with 32 design variations ranging from 2-7 holes.

Multi-Lockit™ for Large Openings hold round or flat cables and have a large mounting hole to allow passage of plugs or bulky assemblies during installation. Their five locking steps accommodate a wide range of chassis thicknesses. Their low profile head satisfies design aesthetics.

Nickel Plated Brass NPT Liquid-Tight Cordgrips provide superior protection of flexible cables. Their nickel plated finish over brass construction gives you excellent corrosion resistance and durability. They are available in sizes NPT 1/8" thru NPT 2", and will accommodate various cable diameters.

Pigtail Strain Relief Bushings with Spring for Flat and Round Cable have an integral nylon spring that eases the cable into a lazy bend. This prevents sharp bending and assures the longest cable and product life. (Not recommended for applications where the power supply cord is subject to whipping or jump rope type motion.)

PIGTAIL™ Metric Extra Grip Liquid-Tight Cordgrips fit flexible cords for use in clearance or threaded holes and have extra long fingers inside for a superior grip. They have a flexible "PIGTAIL™" extender to prevent sharp bends and extend the life of your cable. These cordgrips provide the widest range of cable and/or thread sizes available. We offer 8 sizes, for cable diameters ranging from 0.065" - 0.709" (1.700mm - 18.00mm). They are all Nylon construction with TPE (Buna N Sealing gland). They provide protection from vibration, superior sealing at mounting ring, secure grip on the cable and resist salt water, weak acids, gasoline, alcohol, oil, grease and common solvents.

PIGTAIL™ NPT Extra Grip Liquid-Tight Cordgrips fit flexible cords for use in clearance or threaded holes and have extra long fingers inside for a superior grip. They have a flexible "PIGTAIL™" extender to prevent sharp bends and extend the life of your cable. These cordgrips provide the widest range of cable and/or thread sizes available. We offer 8 sizes, for cable diameters ranging from 0.065" - 0.709" (1.70mm - 18.00mm). They are all Nylon construction, with TPE (Buna N Sealing gland). They provide protection from vibration, superior sealing at mounting ring, secure grip on the cable, and resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents.

PIGTAIL™ NPT Liquid-Tight Cordgrips fit flexible cords, and are for use in clearance or threaded holes. They have a flexible "PIGTAIL™" extender to prevent sharp bends and extend the life of your cable.

We offer 6 sizes, for cable diameters ranging from 0.069" - 0.709" (1.80mm - 18.00mm). They are all Nylon construction, with TPE (Buna N Sealing gland). They provide protection from vibration, superior sealing at mounting ring, secure grip on the cable, and resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents.

PIGTAIL™ PG Extra Grip Liquid-Tight Cordgrips for flexible cords can be installed in either clearance or threaded holes and have extra long fingers inside for a more secure grip. These cordgrips provide the widest range of cable and/or thread sizes available, including 6 threads for cables ranging from 0.065" - 0.689" (1.70mm - 17.50mm). Acme threads on the body prevent skipping and speed installation. The flexible "PIGTAIL™" extender prevents sharp bends and extends cable life. They are available in 10 sizes for cable, tubing, etc. Locknuts are INCLUDED.

PIGTAIL™ PG Nylon Liquid-Tight Cordgrips can be installed in either clearance or threaded holes, and they are made for flexible cords. Acme threads on the body prevent skipping and speed installation. Their flexible "PIGTAIL™" extender prevents sharp bends and extends cable life. They are available in ten sizes for cable, tubing, etc., with diameters ranging from 0.064' to 0.709" (1.60mm to 18.00mm).

Pigtail™; RDD Lockit™; Strain Relief Bushings snap onto flat or round cables for faster assembly into "Double D" mounting holes. The pigtail design gently bends the cable without kinks & installs without tools.

• Fit a wide range of panel thicknesses
• May be used with mounting hole plugs if needed to allow for a single panel design in multiple applications.

This PVC Flexible Liquid Tight Conduit works with Light Duty Equipment/OEM Hoses. It comes in sizes 3/8" thru 2", in standard coils of 100'. It is constructed from extremely flexible PVC with a convoluted surface.

RDD Flat Wire Lockits™ are the next generation in strain relief. They provide all the benefits of the standard RDD Lockit™ for a flat wire. It is designed with multiple panel locking steps to secure the strain relief into panels up to 0.157" thick. A RDD strain relief mounting hole punch is available. See "Strain Reliefs for Wire/Cables" under "Wire Management."

This RDD Hole Punch for RDD Strain Reliefs punches a mounting hole configured specifically for RDD Strain Reliefs. This tool can be used to punch mounting holes for several different strain reliefs in the RDD Lockit™ family. Those strain reliefs are featured under the "Strain Reliefs for Wire/Cable" section of the "Wiring Management" product category.

Right Angle Metric Liquid Tight Cordgrips provide liquid tight integrity, even in the open position. They are all-nylon construction with Buna N gland and have a Ratchet-designed sealing nut for firm anti-vibration support. Their integral sealing ring ensures a superior seal every time. These cordgrips are molded in the open position for ease of installation and come in 6 sizes to fit cable, tubing, etc., with diameters of 0.065in - 0.450in (1.70mm-11.40mm).

Right Angle NPT Liquid-Tight Cordgrips provide Liquid-Tight integrity, even in the open position. They are all-nylon construction with a TPE gland, molded in the open position for ease of installation, and come in 3 sizes to fit cable, tubing, etc., with diameters of 0.065in - 0.450in (1.70mm-11.40mm).

Our Right Angle PG Liquid-Tight Nylon Cordgrips provide you time saving installation. All you do is push the cable through the installed fitting and tighten the dome nut. Each fitting is molded in the open position. After cable insertion, the fitting snaps closed, bending the cable without damage. Locknuts are included for PG Hubs. For Nylon or Steel specifications, please refer to the "Liquid-Tight Locknuts" section of our Electrical catalog.

Right Angle RDD Lockits™ for Round Wires provide all the benefits of the standard RDD Lockits™ Strain Relief for right angle applications. Designed with multiple panel locking steps to secure the strain relief into panels up to 0.157" thick. An RDD strain relief mounting hole punch is available. See "Strain Reliefs for Wires & Cables" under "Electrical."

Solar Masthead® Cordgrips accommodate XHHW-2 12 AWG and 10 AWG wire, and are specifically designed for solar rooftop installations.

Lockit™ for a U-Shape Slot are designed to hold round and flat cables in a U-shaped panel slot. Fingertip pressure snaps the Lockit™ into the mounting hole. Designed to be installed in a "U" shape panel slot (see schematic). Securely anchors, insulates, and protects cables at panel entry point. Slim head profile makes Lockit™ design-specific.

Steel NPT Liquid-Tight Cordgrips for flexible cords have a compact design, allowing fittings to be consecutively ganged - no skipping knockouts - and occupying less "real estate". They are available in 12 sizes, with 1/2" to 3/4" NPT Hubs, and cover a cable diameter range of 0.150" (3.80 mm) to 0.850" (21.60 mm).

Straight Thru NPT Liquid-Tight Cordgrips fit flexible cords, and are for use in clearance or threaded holes. We offer 12 sizes, for cable diameters ranging from 0.065in - 1.260in (1.70mm - 32.00mm). They are all Nylon construction, with TPE or Buna N Sealing gland. They provide protection from vibration, superior sealing at mounting ring, secure grip on the cable, and resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents.

Straight Thru PG Liquid-Tight Cordgrips fit flexible cords, and are for use in clearance or threaded holes. We offer 17 sizes, for cable diameters ranging from 0.064in - 1.732in (1.60mm - 44.00mm). They are all Nylon construction, with TPE (Buna N Sealing gland). They provide protection from vibration, superior sealing at mounting ring, secure grip on the cable, and resist salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents.

Straight Thru PG Liquid-Tight Cordgrips with Longer Fingers give you easy, time-saving installation on flexible cords in both clearance or threaded holes. The longer fingers inside provide an even tighter grip. They are all-nylon construction with Buna N Sealing Gland and are available in 16 sizes, including 6 thread sizes for cables ranging from 0.065in - 1.260in (1.70mm - 32.00mm). Their ratchet-designed Sealing Nut offers superior protection against vibration and a firm grip on the cable, and the integral Sealing Ring ensures a superior seal at the mounting locations every time.

Straight Thru Strain Reliefs for Flat Cables are the most popular strain relief made. There are 23 sizes available in your choice of Black or White. All have a UL description. The installation is comprised of three easy steps: 1) simply position on the wire, 2) close the strain relief over the wire, and 3) push it into your hole.

Straight Thru Strain Reliefs for Round Cables are the most popular strain reliefs for flexible power cords made. We offer 23 sizes to suit your needs. To install, simply position on your wire, close the strain relief over the wire, and push it into your panel hole.

Thin Panel RDD Lockits™ for Round Wires provide all the benefits of the standard RDD Lockits for use in thinner panels. A single panel locking step provides a secure fit into round mounting holes (0.625" with 0.550 flats) in 0.062" panels. An RDD strain relief mounting hole punch is available. See "Strain Reliefs for Wire/Cables" under "Wiring Management."

The UL Knot will fit cables SPT-2, AWG/Conductors 18/2 and they are easy to assemble. The cord is inserted into the two sides making a loop over the center bar and simply pull the cord down tight and your strain relief is installed.

Zinc Die Cast NPT Liquid-Tight Cordgrips for flexible cords come in 6 sizes, with 1/2" to 3/4" NPT hubs. They cover a cable diameter range of 0.190" (4.80mm) to 0.725" (18.40mm).