EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
Wires inserted into opposite ends of Parallel Splices lay on top of one another inside the splice to form a parallel connection. They are available with or without insulation in wire sizes AWG 22 through 4/0.
Unit of Measure

Specifications

Type

 N/A Wire

Maximum Overall Depth

 N/A 0.374 in9.50 mm

Maximum Length

 N/A 0.477 in12.10 mm

Minimum Inside Diameter

 N/A 0.230 in5.80 mm

Wire Size

 N/A 2 AWG

Barrel Features

Barrel Features

 N/A
  • Non Insulated, Butted Seam - High Quality, One Piece Design; Economical; Greatest Versatility
  • Non Insulated, Welded Seam - Seam Welded Shut; Ideal for Hard-to-Crimp Solid and Stranded Wires; Can be crimped from any angle.
  • PVC Insulated - Permanent Rigid PVC Sleeve; Protects Against Vibration Damage; Funnel Entrance Prevents Wire from Folding; Improves Crimping Rates; Enhances Wire Termination Reliability
  • Large Gauge, Straight Entry - Color-Coded Rigid Nylon Insulating Sleeve; Withstands Extreme Operating Temperatures; Increases Crimping Rates; Enhances Wire Termination Reliability

Features and Benefits

Features and Benefits

 N/A Parallel splices are especially useful when solid and stranded wires must be joined. After the two wires are inserted, only one central crimp is required for a secure connection.