320-C14 SNAP-IN INLET CONNECTORS snap-in, and are suitable for chassis from 0.032" (0.80mm) to 0.079" (2.00mm) thick.

These 320-C14 Snap-In Inlet Connector with Fuseholders allow you the option of either attaching a North American or International cordset to your equipment.

320-C8 Low Current Inlet Connectors are available in both snap-in and screw mount versions, screw mounts are shown.

320-C8 Snap-In Low Current Inlet Connectors are available in both snap-in and screw mount versions, snap-in shown.

Weatherproof 3-Way Connectors provide a rugged, environmentally-sealed connection that will insulate, seal and protect joints from physical abuse and abrasion, water, salt and other corrosive compounds.

90° Angled AC Power Plug Assemblies are available in straight and 90° angled cable entry to easily convert a power cord into a detachable power cordset. 90° Angled comes in C13 and C14 gauges. For Straight AC Power Plug Assemblies, please refer to the "IEC Connectors and Power Outlets" section of our Electrical Encyclopedia.

Bi-Claw Footed, Nail-In Clamps are constructed of shock resistant polyethylene. Each clamp includes a pre-inserted, galvanized steel nail that is corrosion resistant. This unique clamp will curve around your bundle giving added strength to your application.

These one-piece Connectors for Flexible Metal Conduit are an inexpensive way to quickly connect flexible conduit to junction boxes or Motor Control Panels. They require no tools or fasteners to assemble - simply twist on and snap in!

Butt Splices are used to splice or connect wires to one another by butting their ends together inside the splice and are available in AWG 22 - 1/0 wire sizes.

Wires inserted into opposite ends of Oval Parallel Splices lay on top of one another inside the splice to form a parallel connection. They have an inner reinforcement to withstand vibration and movement, and are available with or without insulation in wire sizes AWG 22 to 4/0.

Parallel Solder Splices are available in AWG 26 to 10 wire range.

Wires inserted into opposite ends of Parallel Splices lay on top of one another inside the splice to form a parallel connection. They are available with or without insulation in wire sizes AWG 22 through 4/0.

Window Butt Splices have the same application as regular butt splices, in addition to a window that allows you to visually inspect the wire end after insertion. They are available in AWG 22-10 wire sizes.

Funnel Entry Butt Splices are especially suited for automated installation processes that use machines and robotic equipment to terminate and crimp. They are available in AWG 22-10 wire sizes as listed below. These splices can be ordered by loose pieces or on one or more carrier types for your automated assembly.

Insulated Closed-End Connectors consist of a copper closed-end connector inside a nylon insulating sleeve. They are available in wire ranges of AWG 22/14, 22/12, 16/10 and 8.

These IEC 320-C13 Duplex Outlet Connectors are rated at 10 Amps/250 Volts.

These "Reverse" IEC 320-C13 Outlet Connectors are used for accessory power connections.

These IEC 320-C13 Snap-In Outlet Connectors are suitable for chassis from 0.032" (0.80mm) to 0.125" (3.20mm) thick.

IEC 320-C6 Snap-In Low Current Inlet Connectors are a snap-in mount.

Our nylon Male Turn-2 Lock Premold is designed for use with EFC blades and pins (consult EFC for details on our complete line of blades and pins).

Nail Clips for Co-Ax Cables are constructed of shock resistant polyethylene. Each clamp is pre-inserted with a corrosion resistant nail of galvanized steel. These clips handle round co-ax cables ranging from 1/8" to 7/8" in diameter.

Patented NEMA 5-15P Male Pre-Assembled Cordset Components allow you to crimp all 3 terminals at once. Parts shown are the Male Bridge Assembly.

These patented NEMA 5-15R Female Bridges allow you to crimp all 3 terminals at once.

These Back Push-In Duplex Outlets allow easy installation in two versions; Square, and Oval with Ears.

For Side Wiring Duplex Outlets, please refer to the "IEC Connectors and Power Outlets" section of our Electrical Encyclopedia.

These NEMA 5-15R Snap-In Receptacles have three-wire grounding.

These NEMA 1-15R Snap-In Receptacles with "QD" Tabs or Solid Wire have three-wire grounding. Their unique design allows for either solid or stranded wire termination, and they are available in two styles.

These NEMA 1-15R Snap-In Receptacles with "V" Slotted Terminals have three-wire grounding. Connections are made via "V" slotted terminals.

Non Insulated Closed-End Connectors are available in Wire Ranges of AWG 22/14, 22/12, 16/10 and 8.

Polycarbonate Nail Clips, or Masonry Nail Clamps, are constructed of clear high-impact, flame retardant polycarbonate. Each clamp is equipped with a pre-inserted hardened, zinc coated steel nail for easy installation into cinderblock, masonry and other forms of concrete.

Patented Pre-Assembled IEC 320 Cordset Components allow you to crimp all 3 terminals at once and are available assembled or unassembled.

These Right-Angled Printed Circuit Board Connectors are mounted with screws.

These Side Wiring Duplex Outlets allow easy installation.

For Back Push-In Duplex Outlets, please refer to the "IEC Connectors and Power Outlets" section of our Electrical Encyclopedia.

These Snap-In NEMA 1-15R Miniature Power Outlets have 2-wire grounding.

These Step Down Butt Splices are available in four wire range combinations from AWG 22 through 6 wire sizes, in insulated and non-insulated versions.

Straight AC Power Plug Assemblies are available in straight and 90° angled cable entry to easily convert a power cord into a detachable power cordset. Straight shown here. For AC Power Plug Assemblies - Right Angled, please refer to the "IEC Connectors and Power Outlets" section of our Electrical Encyclopedia.

Patented Tri-Tap Premold is a multiple piece unit that reduces the number of crimp connections on an extension cord from 9 down to 3. Now you can crimp all 3 terminals at once. These are available in assembled or component form.

Twist Lock Wire Connectors are cone-shaped with a spring inside to automatically twist together wires as they are driven up into the connector. They are available in Wire Ranges 22/14, 18/10 and 18/8.

Weatherproof Butt Splices provide a rugged, environmentally-sealed connection that will insulate, seal and protect joints from physical abuse and abrasion, water, salt and other corrosive compounds.

Weatherproof Quick Disconnect Couplers provide a rugged, environmentally-sealed connection that will insulate, seal and protect joints from physical abuse and abrasion, water, salt and other corrosive compounds.

Weatherproof Quick Disconnects provide a rugged, environmentally-sealed connection that will insulate, seal and protect joints from physical abuse and abrasion, water, salt and other corrosive compounds.

Weatherproof Snap Plug Receptacles provide a rugged, environmentally-sealed connection that will insulate, seal and protect joints from physical abuse and abrasion, water, salt and other corrosive compounds.

Weatherproof Snap Plugs provide a rugged, environmentally-sealed connection that will insulate, seal and protect joints from physical abuse and abrasion, water, salt and other corrosive compounds. They are available in AWG 22/18 and 16/14 sizes.

Weatherproof Step Down Butt Splices provide a rugged, environmentally-sealed connection that will insulate, seal and protect joints from physical abuse and abrasion, water, salt and other corrosive compounds.

Wing Lock Wire Connectors have an inner spring to accommodate a wider variety of wire size combinations, and "wing-like" protrusions at the sides for ease of application. They are available in 18/10, 18/8 and 14/6 wire ranges.