EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
Lockit™ for a U-Shape Slot are designed to hold round and flat cables in a U-shaped panel slot. Fingertip pressure snaps the Lockit™ into the mounting hole. Designed to be installed in a "U" shape panel slot (see schematic). Securely anchors, insulates, and protects cables at panel entry point. Slim head profile makes Lockit™ design-specific.
Unit of Measure

Specifications

Maximum Panel Size

 N/A 0.062 in

Cable Shape

 N/A Round

Mounting Hole Shape

 N/A U-Shaped

Maximum Wire Size

 N/A 18/3 AWG

Minimum Wire Size

 N/A 18/2 AWG

Maximum Cable Diameter

 N/A 0.290 in

Minimum Cable Diameter

 N/A 0.220 in

Mounting Hole Length

 N/A 0.453 in

Mounting Hole Width

 N/A 0.512 in
Temperature Index1 N/A 125 ºC

Material

 N/A Nylon 6/6
Color2 N/A White

Weight

 N/A 25 lb

Flammability Rating

 N/A 94V-2

Industry Standards/Certifications

 N/A Recognized under the Component Program of Underwriters Laboratories File #E-15331 Certified by the Canadian Standards Association File #LR-8919.

Features and Benefits

Features and Benefits

 N/A
  • Assembly friendly! Independent of insertion into the chassis, Lockit™ Strain Reliefs self-lock onto the cable. Thus, they may be preassembled offline for final assembly at a later time or remote location, for lower installed cost!
  • Large mounting hole design allows passage of plugs or bulky assemblies during installation.
  • Lockit™ Strain Reliefs hold so well they pass the UL pull-out test requirements with or without chassis support.
  • They protect the lifeline of your electric/electronic products by absorbing the forces of push and pull that may be exerted on the flexible power cord. And, their rectangular design eliminates the possibility of part rotation under forces of twist. Five locking steps accommodate a wide range of chassis thickness. Low profile head satisfies design aesthetics.
  • 1 Maximum temperature on part not to exceed 105 ºC.
  • 2 Others are available at extra charge (minimum quantities apply). Please contact EFC International directly.