EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
The Slotted Body Insert has been designed for use in plastics and thin gauge sheet metal applications where increased pull-out resistance is required. The round body has four slotted segments that fold outward from the hole center as the insert is installed, to grip the host material from the backside. They can be used in single, variable or multiple thicknesses of materials with no adjustments, when installed with proper hand or pneumatic torque tools. These inserts are standard with a round head, or order a square head to be used in embossed or molded square-shaped recesses for maximum spin out resistance.
Unit of Measure

Specifications

Thread Size

 N/A M6 x 1

Finish

 N/A Zinc Trivalent Chromate (Hex Free)

Grip Call Out

 N/A 12.7

Industry Standards/Certifications

 N/A International Organization for Standardization (ISO)

Thread Call Out

 N/A 610

Maximum Dimension Il

 N/A 13.21 mm

End Features

 N/A Open

Minimum Dimension D

 N/A 9.35 mm

Maximum Dimension D

 N/A 9.80 mm

Grip Identification Mark

 N/A 1 RAD

Minimum Grip Size

 N/A 7.10 mm

Maximum Grip Size

 N/A 12.7 mm

Minimum Head Height

 N/A 1.35 mm

Maximum Head Height

 N/A 1.60 mm

Minimum Head Outside Diameter

 N/A 15.49 mm

Maximum Head Outside Diameter

 N/A 16.38 mm

Minimum Hole Diameter

 N/A 10.00 mm

Maximum Hole Diameter

 N/A 10.15 mm

Minimum Length

 N/A 30.96 mm

Maximum Length

 N/A 31.72 mm

Features and Benefits

Features and Benefits

 N/A
  • Plastics and Thin Gauge Sheet Metals - Steel 1010/1008
  • Varying Thickness Materials without adjustment, using torque stall type tools available through EFC International
  • Exceptional Pull Out Resistance even in hand-drilled or over-sized holes
  • Superior Corrosion Resistance since all surfaces of the body are plated
  • Superior Thread Strength due to internal roll threading process
  • Quality Installation locate special installation tools anywhere in assembly, even in variable thickness materials, before or after finish.

Note

Note

 N/A Special Installation tools are available through EFC International. Optional features, materials and finishes, including a square-headed design, are also available. Please contact EFC International for more details.