EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
RIV912 Pull-To-Stroke Spin-Pull Tool provides powerful spin/pull action that easily installs MaxTite® fasteners.
RIV912 Pull-To-Stroke Spin-Pull Tools
RIV912 Pull-To-Stroke Spin-Pull Tools - 2
Unit of Measure
Items RIV912 Pull-To-Stroke Spin-Pull Tools
06ARIV912UN
Unified Thread Type RIV912 Pull-To-Stroke Spin-Pull Tool 		RIV912 Pull-To-Stroke Spin-Pull Tools
06ARIV912MT
Metric Thread Type RIV912 Pull-To-Stroke Spin-Pull Tool 		RIV912 Pull-To-Stroke Spin-Pull Tools
06A3440900
RIV912 Pull-To-Stroke Spin-Pull Tool
Description N/A RIV912 Pull-To-Stroke Spin-Pull Tool provides powerful spin/pull action that easily installs MaxTite® fasteners.
Thread Type N/A Unified N/A Metric N/A Tool Only
Air Pressure N/A 90 psi N/A 6 bar N/A
Air Use Volume N/A 457.5 in³ N/A 7.5 L N/A
Maximum Axial Pulling Load at 90 Pound Per Square Inch (psi) Pressure N/A 4721 lb N/A N/A
Maximum Axial Pulling Load at 6 bar Pressure N/A N/A 21 kN N/A
Maximum Stroke N/A 0.256 in N/A 6.5 mm N/A
Minimum Hose Inside Diameter N/A 0.375 in N/A 9.5 mm N/A
Weight N/A 5 lb N/A 2.3 kg N/A
For Use With N/A 4 to 1/2 in Female and 8 to 5/16 in Male Threaded Inserts N/A M3 to M12 Female and M4 to M8 Male Threaded Inserts N/A
Features and Benefits N/A
  • One position trigger mechanism to start automatic stroke.
  • Plastic casing and aluminum piston and cylinder make the tool lighter and easier to use.
  • The mandrel, a hardened socket head cap screw, is easily replaced.
Optional parts for RIV912 Tools include: Extended sleeve and an internal extension.
  • RIV912 Unified Kit includes Tool and Tooling for 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16 Thread Sizes (RIV912-UN)
  • RIV912 Metric Kit includes Tool and Tooling for M4 through M12 Thread Sizes (RIV912-MT)
Notes for below chart:
(1) Weight shown with nose piece.
(2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended.
Note N/A N/A N/A Nose Piece Sold Separately