EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
Lockit™ for a U-Shape Slot are designed to hold round and flat cables in a U-shaped panel slot. Fingertip pressure snaps the Lockit™ into the mounting hole. Designed to be installed in a "U" shape panel slot (see schematic). Securely anchors, insulates, and protects cables at panel entry point. Slim head profile makes Lockit™ design-specific.
ST Lockit™ Strain Relief Bushings with U-Shape Slot
Unit of Measure
Items ST Lockit™ Strain Relief Bushings with U-Shape Slot
70004121
ST Lockit™ Black Strain Relief Bushing with U-Shape Slot 		ST Lockit™ Strain Relief Bushings with U-Shape Slot
70008325
ST Lockit™ White Strain Relief Bushing with U-Shape Slot
Description N/A Lockit™ for a U-Shape Slot are designed to hold round and flat cables in a U-shaped panel slot. Fingertip pressure snaps the Lockit™ into the mounting hole. Designed to be installed in a "U" shape panel slot (see schematic). Securely anchors, insulates, and protects cables at panel entry point. Slim head profile makes Lockit™ design-specific.
Maximum Panel Size N/A 0.062 in
Cable Shape N/A Round
Mounting Hole Shape N/A U-Shaped
Maximum Wire Size N/A 18/3 AWG
Minimum Wire Size N/A 18/2 AWG
Maximum Cable Diameter N/A 0.290 in
Minimum Cable Diameter N/A 0.220 in
Mounting Hole Length N/A 0.453 in
Mounting Hole Width N/A 0.512 in
Temperature Index1 N/A 125 ºC
Material N/A Nylon 6/6
Color2 N/A Black N/A White
Weight N/A 11.67 lb N/A 25 lb
Flammability Rating N/A 94V-2
Industry Standards/Certifications N/A Recognized under the Component Program of Underwriters Laboratories File #E-15331 Certified by the Canadian Standards Association File #LR-8919.
Features and Benefits N/A
  • Assembly friendly! Independent of insertion into the chassis, Lockit™ Strain Reliefs self-lock onto the cable. Thus, they may be preassembled offline for final assembly at a later time or remote location, for lower installed cost!
  • Large mounting hole design allows passage of plugs or bulky assemblies during installation.
  • Lockit™ Strain Reliefs hold so well they pass the UL pull-out test requirements with or without chassis support.
  • They protect the lifeline of your electric/electronic products by absorbing the forces of push and pull that may be exerted on the flexible power cord. And, their rectangular design eliminates the possibility of part rotation under forces of twist. Five locking steps accommodate a wide range of chassis thickness. Low profile head satisfies design aesthetics.
  • 1 Maximum temperature on part not to exceed 105 ºC.
  • 2 Others are available at extra charge (minimum quantities apply). Please contact EFC International directly.