EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
These 90º Sweep Snap-In Nylon Liquid Tight Fittings are cost-saving and UL approved for use with Flexible PVC Liquid Tight Tubing found in the "Conduit/Tubing" section of the our Electrical Engineering Guide. They are available in 3 sizes; 3/8", 1/2", and 3/4", and provide a low-cost, one-piece solution with smooth internal surfaces for easier wire routing, protection and installation. Their all- Nylon 6/6 construction is resistant to salt water, weak acids, gasoline, alcohol, oil, grease and common solvents (note: this feature is not assessed by the UL certification and testing). Optional Collars (Black and Gray) are also available, to neaten rough cut tubing ends, and are listed below. Locknuts are listed in the "Liquid Tight Locknuts" section of our Electrical catalog.
Unit of Measure

Specifications

Mounting Hole Diameter

 N/A 0.875 in22.20 mm

Body Length

 N/A 0.390 in9.90 mm

Fits Conduit Size

 N/A 1/2 in

Maximum Overall Length

 N/A 2.749 in69.80 mm

Flange Outside Diameter

 N/A 31.20 mm1.230 in

Maximum Overall Height

 N/A 1.754 in44.60 mm

Color

 N/A Gray

Material

 N/A Nylon 6/6
Temperature Index1 N/A 125 ºC

Flammability Rating

 N/A 94V-2

Industry Standards/Certifications

 N/A Recognized under the Component Program of Underwriter's Laboratories File #E121095.

Features and Benefits

Features and Benefits

 N/A
  • Easy, permanent assembly - twist the Tubing over the connector ferrule until the Tubing "clicks" into place.
  • No tools needed for installation.
  • Unique locking fingers accommodate various chassis thicknesses.
  • Suitable for a wide array of electrical applications: -Commercial and Industrial HVAC Systems -Motorized Equipment -Enclosed Power Sources -Garage Door Openers -Major Appliances
  • 1 Maximum Temperature on the part shall not exceed 105 ºC.