EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
Miniature Self-Clinching Self-Retaining Nuts are designed to provide strong threads in a minimum of space. They are available with locking and non-locking threads and are directly interchangeable with industry standards. All self-clinching fasteners install into a round hole that may be punched or drilled in ductile materials. They provide a permanently attached fastener, which becomes an integral part of the panel or frame and eliminates the problems associated with loose hardware. Self-Clinching fasteners provide added value by speeding initial assembly as well as servicing in the field, keeping costs to a minimum.
Unit of Measure

Specifications

Thread Size

 N/A M3 x 0.5

Style

 N/A Non-Locking

Dimension C

 N/A 4.88 mm

Maximum Dimension A

 N/A 3.96 mm

Maximum Dimension D

 N/A 1.53 mm

Dimension E

 N/A 1.9 mm

Minimum Panel Thickness

 N/A 1.53 mm

Hole Inside Diameter

 N/A 4.4 mm

Maximum Dimension B

 N/A 4.34 mm

Minimum Center of Hole to Edge of Panel

 N/A 3.6 mm

Finish

 N/A Black, Dry-Film Lubricant per MIL-46010 Type 1 over Cadmium Passivated ASTM A380

Features and Benefits

Features and Benefits

 N/A Self-clinching fasteners are pressed into holes in sheet metal by applying a steady squeezing force. This results in the cold-flow of sheet material, which is displaced by the knurl, into the undercut area on the shank of the fastener. Once fully embedded, the knurled area prevents torque-out during tightening of the mating part.