Print Back
Broaching-Type Fasteners are designed for use on printed circuit boards and on most brittle and hard materials: glass laminates, epoxy or resin with paper, nylon, or canvas bases. They are also used on materials too thin or unsuitable for threading, such as acrylic and polycarbonate panels.
Unit of Measure

Specifications

Thread Size

N/A #10-32

Dimension A

N/A 0.29 in

Dimension B

N/A 0.375 in

Dimension C

N/A 0.127 in

Minimum Panel Thickness

N/A 0.06 in

Hole Inside Diameter

N/A 0.272 in

Minimum Center of Hole to Edge of Panel

N/A 0.28 in

Material

N/A Stainless Steel

Industry Standards/Certifications

N/A Spec. ASTM B633-85

Features and Benefits

Features and Benefits

N/A Since the aforementioned materials do not flow under pressure, these fasteners are designed with a knurled shank that can be pressed into a drilled hole. The shank grips the board with an interference fit by broaching its way into the panel as it is squeezed into the holes. All fasteners from EFC-INTL are identical to industry standards so that they can be fed through standard automatic insertion equipment.

Thread: Class 2B, MIL - S - 7742; (6H ISO Metric)

Use In: Materials with Rockwell Hardness of B-60 or less