EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
Blind Press Nuts with sealed-thread are designed to provide extended thread lengths in thin sheet metal. Press nuts provide a seal against the entrance of dirt's, oils, moisture, and corrosive atmospheres. They are usually more economical to use than nut and screw-type hardware that require elaborate seals and special assembly procedures.
Unit of Measure

Specifications

Thread Size

 N/A M3 x 0.5

Dimension C

 N/A 6.35 mm

Minimum Panel Thickness

 N/A 1.4 mm

Maximum Dimension B

 N/A 1.37 mm

Maximum Barrel Diameter D

 N/A 3.8 mm

Minimum Full Thread Depth X

 N/A 5.3 mm

Maximum Dimension Y

 N/A 8.5 mm

Maximum Shank Diameter A

 N/A 4.22 mm

Dimension Z

 N/A 9.6 mm

Minimum Center of Hole to Edge of Panel

 N/A 4.8 mm

Material

 N/A Stainless Steel

Features and Benefits

Features and Benefits

 N/A Self-clinching fasteners are pressed into holes in sheet metal by applying a steady squeezing force. This results in the cold-flow of sheet material, which is displaced by the knurl, into the undercut area on the shank of the fastener. Once fully embedded, the knurled area prevents torque-out during tightening of mating part.