EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
Pull Tab Vinyl Plastic Caps offer excellent protection from moisture and contaminates. With sizes to fit 3/16" to 1-1/8" diameters, they stretch just enough to form for a secure fit and will not fall off during shipment. An ergonomic design makes these vinyl caps easy to remove from your part. Pull Tab Vinyl Caps can be produced in various colors, wall thicknesses, hardness durometers and lengths.
Unit of Measure

Specifications

Material

 N/A Vinyl

Inside Diameter

 N/A 0.655 mm16.6 in

Minimum Inside Length

 N/A 0.25 in6.4 mm

Maximum Inside Length

 N/A 1.5 in38.1 mm

Wall Thickness

 N/A 0.06 in1.5 mm

Tab Height

 N/A 0.812 in20.6 mm

Color

 N/A Wide Selection Available

Features and Benefits

Features and Benefits

 N/A
  • Flexible Yet Durable - Won't Split, Tear or Shred
  • Flat / Ergonomic Tab for Easy Removal
  • Stretches for a Snug Fit with no splitting, tearing or shredding
Vinyl plastic pull tab caps are often used as inexpensive and disposable, single-use masking caps for painting and coating processes under 300 ºF. The pull tab end makes removal easy. For higher temperatures, they can also be produced in High Temperature Vinyl.

Note

Note

 N/A Please contact an EFC Representative.

Wall thickness is measured approximately 1/4" (6.35mm) from open end and increases slightly toward the closed end of the cap.