Standard Trim Clips

Standard Trim Clips are excellent general-purpose fasteners. They are ideally suited for trim strips, access plates, or any light application where removability is important. Standard Trim Clips are designed for use over rectangular studs or integrally molded blades ribs. This Trim Clip attaches onto the rib with push-on force. Then the assembly easily mates with the structural panel with a push-to-snap-in force. Insertion and pull-out forces vary depending on the mating panel hole configuration, panel thickness and finish.

Unit of Measure

Specifications | Features and Benefits

Specifications

Slot Length	N/A 25.4 mm
Design Variation	N/A BT
Part Height	N/A 13 mm
Rib Thickness	N/A 1.30 to 1.80 mm
Slot Width	N/A 5.1 to 5.3 mm
Setup Height	N/A 7.6 to 7.6 mm

Features and Benefits

N/A

Perfect for blind side assembly
Removable and reusable
Self-retained
Provide unblemished exposed panel surfaces
Snug, rattle-free installation provided by self-equalizing retaining legs, which form into a dart-type configuration

Specifications

Slot Length

Design Variation

Part Height

Rib Thickness

Slot Width

Setup Height

Features and Benefits

Features and Benefits