EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
Rectangular Stud Trim Clips are an excellent general-purpose fastener; ideally suited on trim strips, access plates or any light application where removability is of importance. They are designed for use over rectangular studs or integrally molded blades, ribs, etc. The trim clip attaches to the trim piece with push-on force over the stud, blade or rib. Then the assembly easily mates the structural panel with a push-to-snap-in force. Insertion and pull-out forces vary depending on mating panel hole configuration, panel thickness and finish.
Unit of Measure

Specifications

Finish

 N/A Heat Treated

Material Thickness (Decimal)

 N/A 0.71 in

Minimum Panel Size

 N/A 1.50 in

Width

 N/A 16 mm

Length Diameter

 N/A 26.50 mm

Panel Hole Width

 N/A 7.5 mm

Height

 N/A 14 mm

Maximum Panel Size

 N/A 4.50 in

Stud Dimensions

 N/A 8.00 x 4.00 mm

Material

 N/A High Carbon Spring Steel

Features and Benefits

Features and Benefits

 N/A
  • Perfect for blind side assembly
  • Removable and reusable
  • Self-retained
  • Provide unblemished exposed panel surfaces
  • Snug, rattle-free installation provided by self-equalizing retaining legs, which form a dart-type configuration