Item # 10S00100-70, 0.282 Inch (in) Inside Diameter A Standard Solid No Head Brass Knurled Compression Limiter On EFC International

These brass Standard Solid Knurled Compression Limiters have one or two knurled bands for excellent retention in plastic hosts. These Limiters can be used with up to ISO Class 8.8 and SAE Grade 5 bolts. Compression Limiters protect threaded joint integrity in plastic hosts. Tightening a bolt to its required value compresses the plastic and causes creep, loosening and eventual failure of the joint itself. Compression Limiters absorb the load and protect the plastic.

Unit of Measure

Specifications | Features and Benefits

Specifications

Type	N/A Compression
Material	N/A Brass
Features	N/A No Head
Finish	N/A Plain
Hole Size	N/A 0.392 in
Thickness T	N/A 0.05 in
Inside Diameter A	N/A 0.282 in
Maximum Length L	N/A 0.812 in
Minimum Length L	N/A 0.236 in
Length Tolerance (±)	N/A 0.003 in
Nominal Bolt Diameter (Decimal)	N/A 0.25 in
Outside Diameter B	N/A 0.385 in
Print Reference C	N/A 0.397 in
Rated Load	N/A 2325 lb

Features and Benefits

N/A

Square Ends - provide 100% contact with mating surface
Knurl - provides excellent retention
Headed Variation - eliminates washers.

Specifications

Type

Material

Features

Finish

Hole Size

Thickness T

Inside Diameter A

Maximum Length L

Minimum Length L

Length Tolerance (±)

Nominal Bolt Diameter (Decimal)

Outside Diameter B

Print Reference C

Rated Load

Features and Benefits

Features and Benefits