EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
These J-Shaped Routing Clips are an open type clamp with a single bolt hole.
Unit of Measure

Specifications

Finish

 N/A Galvanized G90

Hole Center to End

 N/A 0.375 in

Hole Center to End Tolerance (±)

 N/A 0.015 in

Clamp Size

 N/A 1.437 mm

Center to Center Length

 N/A 1.937 in

Center to Center Tolerance (±)

 N/A 0.031 in

Width

 N/A 0.75 in

Gage (G)

 N/A 0.048 in

Hole Diameter

 N/A 0.406 in

Hole Diameter Tolerance (±)

 N/A 0.005 in

Width Tolerance (±)

 N/A 0.010 in

Tolerance (±)

 N/A 0.015 in

Material

Material

 N/A
  • Hot Dipped Galvanized Steel, Chemically Treated G90
  • CRCQ Steel, 0.0002 min. Zinc with Clear Chromate
  • CRCQ Steel, 0.00015 min. Zinc with Yellow Dichromate
  • CRCQ Steel, 0.0002 min Zinc with Yellow Dichromate

Features and Benefits

Features and Benefits

 N/A This clamp is an excellent choice for installing prior to wire routing. Against a rigid surface, the clamp can be easily closed with a screwdriver blade. Pliers or fingers can be used for closing when the back is not supported. The loop portion is contoured to provide a smooth edge when wire routing occurs after installation.