EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
Indexing Plungers feature a bolt that must be manually disengaged in order to change positioning, thus preventing lateral forces from affecting your locking position. PULL KNOB INDEXING PLUNGERS WITH LOCKING NUTS & LOCKING SLOTS are featured here, in Steel or Stainless Steel with a Thermoplastic Mushroom Knob.
Unit of Measure

Specifications

Type

 N/A Index

Knob

 N/A A

Dimension D

 N/A 5 mm

Dimension L

 N/A 47 mm

Dimension D1

 N/A M10 x 1

Dimension H

 N/A 5 mm

Approximate Spring Force Final Pressure F2

 N/A 12 N

Approximate Spring Force Initial Pressure F1

 N/A 5 N

Dimension D2

 N/A 21 mm

Dimension L1

 N/A 17 mm

F x 30

 N/A 1

Dimension L2

 N/A 7 mm

Dimension L3

 N/A 15 mm

Locking Nut

 N/A No

Locking Slot

 N/A No

Dimension Sw1

 N/A 13 mm

Style

Style

 N/A
  • Standard
  • With Locking Nut
  • With Locking Slot
  • With Locking Nut & Locking Slot

Material

Material

 N/A Steel Version -
  • Locking Pin - Hardened Steel (5.8), Black Oxide, Ground
  • Threaded Sleeve - Hardened Steel (5.8), Black Oxide
  • Mushroom Knob - Thermoplastic

Stainless Version -
  • Locking Pin - Stainless Steel (X 46 Cr 13=1.4034), Hardened
  • Threaded Sleeve - Stainless Steel (X 10 CrNiS 18 9=1.4305)
  • Mushroom Knob - Thermoplastic

Note

Note

 N/A Dozens of standard products to choose from a representative sampling of sizes and styles is shown below. Contact EFC International for a complete listing of all available products, options and specific combinations that meet your needs.