EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
These Double Tube Cushioned Routing Clamps hold two tubes of the same diameters, and have 2 Bolt Holes. These are available with or without vinyl plastisol (PVC) cushioning, which fully encloses the metal and can not come off during assembly or in service.
Unit of Measure

Specifications

Cushion Color

 N/A Black

Cushion Material

 N/A Vinyl, 1/32" Thick, applied by dipping, fully encloses the metal and cannot come off during assembly or in service.

Hole Center to End

 N/A 0.437 in

Hole Center to End Tolerance (±)

 N/A 0.015 in

Width Tolerance (±)

 N/A 0.10 in

Gage (G)

 N/A 0.048 in

Hole Diameter

 N/A 0.406 in

Hole Diameter Tolerance (±)

 N/A 0.005 in

Gap

 N/A 0.062 in

Gap Tolerance (±)

 N/A 0.31 in

Tube Diameter

 N/A 0.687 in

Slot Length

 N/A 0.500 in

Slot Length Tolerance (±)

 N/A 0.020 in

Print Reference

 N/A 0.875 in

Weight

 N/A 6.62 lb

Material

Material

 N/A
  • HD Galvanized Steel, Chemically-Treated G90, Per ASTM A653/A653M
  • CRCQ Steel, 0.0002 min Zinc with Clear Chromate

Features and Benefits

Features and Benefits

 N/A Double Tube Routing Clamps with 2 Bolt Holes can be special ordered to accommodate 2 tubes of differing diameters, or more than 2 tubes of the same or differing diameters.

Parts listed below are of HD Galvanized Steel, CChem-Treated G90, per ASTM A653/A653M . For ordering alternate options, please contact your EFC International Representative.

Inspection note: Ends of legs may not line up if clamp is closed around non-rigid tubing or hose. For inspection, close around a hard mandrel.