Item # 11505000-53, 0.250 Inch (in) Diameter Light Duty Cushioned Routing Clamp with 2 Round Bolt On EFC International

These Light Duty Cushioned Routing Clamps are closed, furnished open. They have black vinyl cushioning and 2 round holes for fastener sizes #6 through #10. They can be snapped over the tube or wire and closed with the bolt at assembly.

Unit of Measure

Specifications | Features and Benefits

Specifications

Finish	N/A Chemically-Treated G90
Cushion Color	N/A Black
Cushion Material	N/A Vinyl 1/32" Thick, applied by dipping, fully encloses the metal and cannot come off during assembly or in service.
Hole Center to End	N/A 0.187 in
Hole Center to End Tolerance (±)	N/A 0.015 in
Center to Center Length	N/A 0.375 in
Center to Center Tolerance (±)	N/A 0.031 in
Width	N/A 0.375 in
Width Tolerance (±)	N/A 0.010 in
Gage (G)	N/A 0.032 in
Hole Diameter	N/A 0.172 in
Hole Diameter Tolerance (±)	N/A 0.005 in
Diameter	N/A 0.250 in
Gap	N/A 0.062 in
Gap Tolerance (±)	N/A 0.031 in
Mounting Holes	N/A 2 Round
Material	N/A HD Galvanized Steel

Features and Benefits

N/A

Furnished Open - to allow clip to snap over wiring or tubing, then closed with the bolt at assembly
Round Top & Lower Holes
Contouring - minimizes distortion during closing

Specifications

Finish

Cushion Color

Cushion Material

Hole Center to End

Hole Center to End Tolerance (±)

Center to Center Length

Center to Center Tolerance (±)

Width

Width Tolerance (±)

Gage (G)

Hole Diameter

Hole Diameter Tolerance (±)

Diameter

Gap

Gap Tolerance (±)

Mounting Holes

Material

Features and Benefits

Features and Benefits