Item # 15K200358-53, 0.875 Inch (in) Width Heavy Duty Furnished Closed Cushioned Routing Clamp On EFC International

Heavy Duty Cushioned Routing Clamps - furnished Closed are for heavy-duty applications, and are made from steel that is heavier or wider than is used for other types. These are available with vinyl plastisol (PVC) cushioning, which fully encloses the metal and can not come off during assembly or in service.

Unit of Measure

Specifications | Features and Benefits | Note

Specifications

Weight	N/A 4.15 lb
Hole Center to End	N/A 0.500 in
Hole Center to End Tolerance (±)	N/A 0.015 in
Center to Center Length	N/A 0.875 in
Center to Center Tolerance (±)	N/A 0.031 in
Width	N/A 0.875 in
Gage (G)	N/A 0.048 in
Hole Diameter	N/A 0.310 in
Hole Diameter Tolerance (±)	N/A 0.001 in
Diameter Tolerance (±)	N/A 0.310 in
Gap	N/A 0.062 in
Gap Tolerance (±)	N/A 0.31 in
Clamp Diameter	N/A 0.375 in
Clamp Diameter Tolerance (±)	N/A 0.31 in
Material	N/A HD Galvanized Steel
Finish	N/A G90 Galvanized
Cushion Material	N/A Black Vinyl

Features and Benefits

N/A Heavier, wider steel for heavy duty applications. Single tube, two bolt holes. Clamps Are Formed Closed - Natural Spring Back Allowed.

Cushion

Black Vinyl
1/32" Thick
Applied by dipping
Fully encloses metal
Does not come off during assembly/service

Note

N/A If opening is necessary for assembly, a closed clamp furnished open should normally be used.

Specifications

Weight

Hole Center to End

Hole Center to End Tolerance (±)

Center to Center Length

Center to Center Tolerance (±)

Width

Gage (G)

Hole Diameter

Hole Diameter Tolerance (±)

Diameter Tolerance (±)

Gap

Gap Tolerance (±)

Clamp Diameter

Clamp Diameter Tolerance (±)

Material

Finish

Cushion Material

Features and Benefits

Features and Benefits

Note

Note