EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
External locking feature requires special nosetip. Provides good vibration resistance. Exceptional clamp-up strength. Wide grip range. Three-leg formation compensates for oversized or irregular holes. There are 2 styles available, one with protruding head and one with countersunk head.
Unit of Measure

Specifications

Hole Size

 N/A 0.204 to 0.209 in

Nominal Rivet Diameter

 N/A 3/16 in

Mandrel Material

 N/A Aluminum

Maximum Rivet Length L

 N/A 1.300 in

Rivet Material

 N/A Aluminum

Maximum Blind Length E

 N/A 1.620

Countersunk Head Diameter A

 N/A 0.335 in

Countersunk Head Thickness B

 N/A 0.070 in

Rivet Grip Range G

 N/A 0.562 to 0.750 in

Sleeve Diameter D

 N/A 0.197 in

Stem Diameter S

 N/A 0.103 in

Features and Benefits

Features and Benefits

 N/A
  • Visible Lock - When using the prescribed nosetip, the rivet stem and body are physically and visibly locked. This provides good vibration resistance and allows inspection of the lock, ensuring a quality fastened joint.
  • Grip Tolerant - Will fasten materials over a wide range of sheet thicknesses.
  • Sealing Capability - With the use of an optional rubber washer, this fastener can be made to effect a weather-resistant seal.
  • Hole Preparation - The three legs provide a large blind-side bearing surface over which to distribute loads.