EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
Standard Trim Clips are excellent general-purpose fasteners. They are ideally suited for trim strips, access plates, or any light application where removability is important. Standard Trim Clips are designed for use over rectangular studs or integrally molded blades ribs. This Trim Clip attaches onto the rib with push-on force. Then the assembly easily mates with the structural panel with a push-to-snap-in force. Insertion and pull-out forces vary depending on the mating panel hole configuration, panel thickness and finish.
Standard Metal Trim Clips
Unit of Measure
Items Standard Metal Trim Clips
01500075-3963
12.9 Millimeter (mm) Part Height Standard Trim Clip 		Standard Metal Trim Clips
01500720-375
16.5 Millimeter (mm) Part Height Standard Trim Clip 		Standard Metal Trim Clips
01500438-3963
14 Millimeter (mm) Part Height Standard Trim Clip 		Standard Metal Trim Clips
01500698-00
14.7 Millimeter (mm) Part Height Standard Trim Clip 		Standard Metal Trim Clips
70003058
14.7 Millimeter (mm) Part Height Standard Trim Clip
Description N/A Standard Trim Clips are excellent general-purpose fasteners. They are ideally suited for trim strips, access plates, or any light application where removability is important. Standard Trim Clips are designed for use over rectangular studs or integrally molded blades ribs. This Trim Clip attaches onto the rib with push-on force. Then the assembly easily mates with the structural panel with a push-to-snap-in force. Insertion and pull-out forces vary depending on the mating panel hole configuration, panel thickness and finish.
Weight N/A
Slot Length N/A 25.4 mm N/A 16.0 mm N/A 20.5 mm N/A 16.0 mm N/A 16.0 mm
Design Variation N/A D N/A B N/A Special N/A J N/A J
Part Height N/A 12.9 mm N/A 16.5 mm N/A 14 mm N/A 14.7 mm N/A 14.7 mm
Rib Thickness N/A 1.3 to 1.8 mm N/A 1.4 to 1.8 mm N/A 0.84 to 0.94 mm N/A 0.90 to 1.10 mm N/A 0.90 to 1.10 mm
Slot Width N/A 5.3 to 5.3 mm N/A 8.0 to 8.5 mm N/A 8.4 to 8.6 mm N/A 5.4 to 5.6 mm N/A 5.4 to 5.6 mm
Setup Height N/A 5.6 to 6.6 mm N/A 10.6 to 11.8 mm N/A 3.0 to 3.0 mm N/A 6.05 to 6.05 mm N/A 6.90 to 7.30 mm
Original Equipment Manufacturer (OEM) Reference N/A
Features and Benefits N/A
  • Perfect for blind side assembly
  • Removable and reusable
  • Self-retained
  • Provide unblemished exposed panel surfaces
  • Snug, rattle-free installation provided by self-equalizing retaining legs, which form into a dart-type configuration
Panel Thickness N/A