EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
These J-Shaped Routing Clips are an open type clamp with a single bolt hole.
J-Shaped Routing Clamps with 1 Bolt Hole
Unit of Measure
Items J-Shaped Routing Clamps with 1 Bolt Hole
70011064
0.203 Inch (in) Hole Diameter J-Shaped Routing Clamp with 1 Bolt Hole 		J-Shaped Routing Clamps with 1 Bolt Hole
11000JC7030-13
0.203 Inch (in) Hole Diameter J-Shaped Routing Clamp with 1 Bolt Hole 		J-Shaped Routing Clamps with 1 Bolt Hole
11125207J-06Q
0.203 Inch (in) Hole Diameter J-Shaped Routing Clamp with 1 Bolt Hole 		J-Shaped Routing Clamps with 1 Bolt Hole
113010500-13
0.406 Inch (in) Hole Diameter J-Shaped Routing Clamp with 1 Bolt Hole 		J-Shaped Routing Clamps with 1 Bolt Hole
11317000-13
0.406 Inch (in) Hole Diameter J-Shaped Routing Clamp with 1 Bolt Hole
Description N/A These J-Shaped Routing Clips are an open type clamp with a single bolt hole.
Finish N/A Galvanized G90
Hole Center to End N/A 0.218 in N/A 0.218 in N/A 0.218 in N/A 0.375 in N/A 0.375 in
Hole Center to End Tolerance (±) N/A 0.015 in
Clamp Size N/A 0.250 in N/A 0.187 in N/A 0.125 in N/A 0.312 in N/A 0.437 in
Center to Center Length N/A 0.750 in N/A 0.687 in N/A 0.625 in N/A 0.906 in N/A 1.000 in
Center to Center Tolerance (±) N/A 0.031 in
Width N/A 0.5 in N/A 0.5 in N/A 0.5 in N/A 0.75 in N/A 0.75 in
Gage (G) N/A 0.032 in N/A 0.025 in N/A 0.025 in N/A 0.032 in N/A 0.032 in
Hole Diameter N/A 0.203 in N/A 0.203 in N/A 0.203 in N/A 0.406 in N/A 0.406 in
Hole Diameter Tolerance (±) N/A 0.005 in
Width Tolerance (±) N/A 0.010 in
Tolerance (±) N/A 0.015 in
Material N/A
  • Hot Dipped Galvanized Steel, Chemically Treated G90
  • CRCQ Steel, 0.0002 min. Zinc with Clear Chromate
  • CRCQ Steel, 0.00015 min. Zinc with Yellow Dichromate
  • CRCQ Steel, 0.0002 min Zinc with Yellow Dichromate
Features and Benefits N/A This clamp is an excellent choice for installing prior to wire routing. Against a rigid surface, the clamp can be easily closed with a screwdriver blade. Pliers or fingers can be used for closing when the back is not supported. The loop portion is contoured to provide a smooth edge when wire routing occurs after installation.