Oetiker® 1-Ear Stainless Steel Clamps with Mechanical Interlock

These Oetiker® 1-Ear Clamps have a Mechanical Interlock which is superior to any other joint. Spot welding techniques are not used and therefore the possibility of failure due to corrosion at the spot weld is eliminated. All 1-EAR CLAMPS feature the ear with the "dimple", the simple design difference that not only adds increased strength to the grip of the clamp, but also creates a spring-like action allowing the clamp to "breathe" without loosening. 1-Ear Clamps are used in places where clamping a second ear is impractical, or where a quick, repeatable and compact assembly is important in conjunction with a small clamping range. The lightweight, 7.00 mm version featured on this page is made of austenitic stainless steel for extra strength and anti-corrosive properties. The chemical composition and mechanical properties provide an exceptional combination of ductility and toughness.

Unit of Measure

Items	14000001-19Q 31.60 Millimeter (mm) Maximum Size 1-Ear Stainless Steel Clamp with Mechanical Interlock	14000086-19Q 10.10 Millimeter (mm) Maximum Size 1-Ear Stainless Steel Clamp with Mechanical Interlock	14000088-19Q 11.30 Millimeter (mm) Maximum Size 1-Ear Stainless Steel Clamp with Mechanical Interlock	14000089-19Q 12.30 Millimeter (mm) Maximum Size 1-Ear Stainless Steel Clamp with Mechanical Interlock	14000090-19Q 13.30 Millimeter (mm) Maximum Size 1-Ear Stainless Steel Clamp with Mechanical Interlock
Description	N/A These 1-Ear Clamps have a Mechanical Interlock which is superior to any other joint. Spot welding techniques are not used and therefore the possibility of failure due to corrosion at the spot weld is eliminated. All 1-EAR CLAMPS feature the ear with the "dimple", the simple design difference that not only adds increased strength to the grip of the clamp, but also creates a spring-like action allowing the clamp to "breathe" without loosening. 1-Ear Clamps are used in places where clamping a second ear is impractical, or where a quick, repeatable and compact assembly is important in conjunction with a small clamping range. The lightweight, 7.00 mm version featured on this page is made of austenitic stainless steel for extra strength and anti-corrosive properties. The chemical composition and mechanical properties provide an exceptional combination of ductility and toughness.
Band Width (Decimal)	N/A 0.275 in7.00 mm
Finish	N/A Plain
Material Thickness (Decimal)	N/A 0.6 mm0.024 in
Maximum Clamp Size	N/A 1.244 in31.60 mm	N/A 0.398 in10.10 mm	N/A 0.445 in11.30 mm	N/A 0.484 in12.30 mm	N/A 0.524 in13.30 mm
Minimum Clamp Size	N/A 1.122 in28.50 mm	N/A 0.327 in8.30 mm	N/A 0.382 in9.70 mm	N/A 0.409 in10.40 mm	N/A 0.449 in11.40 mm
Material	N/A 304 Stainless Steel
Note for Material	N/A Designated DIN 1.4301 / UNS S30400. This 18% chromium, 8% nickel alloy is practically immune to the neutral salt-spray procedure, and has excellent resistance to many alternative corrosive environments.
Weight	N/A 0.84 lb	N/A 0.34 lb	N/A 0.38 lb	N/A 0.4 lb	N/A 0.43 lb
Applications	N/A Low pressure applications such as automotive (not fuel lines), appliances, industrial machinery, underground irrigation systems and beverage dispensing equipment.
Features and Benefits	N/A Designed for mass production applications where inexpensive clamps are needed. Mechanical Interlock permits use of pre-coated material. Specially formed strip edges reduce risk of damage to part being clamped. Tampering is visible
Note	N/A Special Installation tools available. Please contact EFC International for more information.