EFC International - Klamp Tite® Countersunk Breakstem Rivets

Unit of Measure

Items	E26007590001 Klamp Tite® 0.985 Inch (in) Maximum Length Countersunk Breakstem Rivet	E26007590002 Klamp Tite® 1.300 Inch (in) Maximum Length Countersunk Breakstem Rivet
Description	N/A External locking feature requires special nosetip. Provides good vibration resistance. Exceptional clamp-up strength. Wide grip range. Three-leg formation compensates for oversized or irregular holes. There are 2 styles available, one with protruding head and one with countersunk head.
Hole Size	N/A 0.204 to 0.209 in
Nominal Rivet Diameter	N/A 3/16 in
Mandrel Material	N/A Aluminum
Maximum Rivet Length L	N/A 0.985 in	N/A 1.300 in
Rivet Material	N/A Aluminum
Maximum Blind Length E	N/A 1.300	N/A 1.620
Countersunk Head Diameter A	N/A 0.335 in
Countersunk Head Thickness B	N/A 0.070 in
Rivet Grip Range G	N/A 0.187 to 0.375 in	N/A 0.562 to 0.750 in
Sleeve Diameter D	N/A 0.197 in
Stem Diameter S	N/A 0.103 in
Features and Benefits	N/A Visible Lock - When using the prescribed nosetip, the rivet stem and body are physically and visibly locked. This provides good vibration resistance and allows inspection of the lock, ensuring a quality fastened joint. Grip Tolerant - Will fasten materials over a wide range of sheet thicknesses. Sealing Capability - With the use of an optional rubber washer, this fastener can be made to effect a weather-resistant seal. Hole Preparation - The three legs provide a large blind-side bearing surface over which to distribute loads.