EFC International
EFC International
1940 Craigshire St. Louis,
MO 63146-4008
Phone: 1 314.434.28881
Contact: www.efc-intl.com/contact
Website: www.efc-intl.com
Print Back
These Align Nuts can overcome panel-aligning problems on fast-moving assembly lines. They snap quickly into position on metal or plastic panels and instantly align with power-driven screws. Because drift pins or forced alignment is not needed, these Align Nuts eliminate delays and the risks of hole/panel damage and expensive scrap loss.
Align Nuts
Unit of Measure
Items Align Nuts
01500808-3963
9.5 Millimeter (mm) Throat Distance Align Nut 		Align Nuts
01500552-52
9.5 Millimeter (mm) Throat Distance Align Nut 		Align Nuts
01500545-01
14.5 Millimeter (mm) Throat Distance Align Nut 		Align Nuts
01500484-3963
7.0 Millimeter (mm) Throat Distance Align Nut 		Align Nuts
01500484-963
7.0 Millimeter (mm) Throat Distance Align Nut
Description N/A These Align Nuts can overcome panel-aligning problems on fast-moving assembly lines. They snap quickly into position on metal or plastic panels and instantly align with power-driven screws. Because drift pins or forced alignment is not needed, these Align Nuts eliminate delays and the risks of hole/panel damage and expensive scrap loss.
Screw Size N/A M4.2 x 1.41 N/A M4.2 x 1.41 N/A M6 x 1 N/A M4.2 x 1.41 N/A M4.2 x 1.41
Panel Size N/A 0.8 in1.35 in N/A 1.5 mm3.0 mm N/A 2.0 mm N/A 1.8 mm2.0 mm N/A 1.8 mm2.0 mm
Throat Distance N/A 9.5 mm N/A 9.5 mm N/A 14.5 mm N/A 7.0 mm N/A 7.0 mm
Trade Name N/A U-Nut Align Nut
Original Equipment Manufacturer (OEM) Reference N/A N/A N/A N/A 11517052 N/A
SAP Number N/A N/A N/A N/A 137648000 N/A 137648000
Features and Benefits N/A One-piece and self-retaining, Align Nuts combine stamped fastener convenience and economy with multiple thread strength and reliability. The S-shaped spring steel retainer has generous elongated mounting holes that permit up to 1/4". The trapped sliding member incorporates a patented extruded configuration that provides high torque installation and withstands unusually high clamp loads. Prevailing torque on the screw is inherent in the design. The screw will not loosen due to vibration, panel set or migration.

All parts are Spring Steel, heat treated, unless otherwise specified.
Note N/A Please contact an EFC representative for available finishes.