Request Information
The RIV916 Pull-to-Stroke for Plus+Tite® Inserts offers a long stroke to easily install the straight shank and pre-bulbed Plus+Tite® fasteners.
Unit of Measure

Specifications

Thread Type

 N/A Unified

Air Pressure

 N/A 90 psi

Air Use Volume

 N/A 457.5 in³

Maximum Axial Pulling Load at 90 Pound Per Square Inch (psi) Pressure

 N/A 2923 lb

Maximum Stroke

 N/A 0.630 in

Minimum Hose Inside Diameter

 N/A 0.375 in

Weight

 N/A 5 lb

For Use With

 N/A 10 to 3/8 in Female Threaded Inserts

Features and Benefits

Features and Benefits

 N/A
  • Automatic stroke from one-position trigger mechanism
  • Mandrel, a hardened socket head cap screw, is easily replaced
  • Production rate increases with auto-reverse after installation
    • Notes for below chart:
    (1) Weight shown with nose piece.
    (2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended.
Product Catalog