Request Information
The RIV916 Pull-to-Stroke for Plus+Tite® Inserts offers a long stroke to easily install the straight shank and pre-bulbed Plus+Tite® fasteners.
Unit of Measure

Specifications

Thread Type

 N/A Metric

Air Pressure

 N/A 6 bar

Air Use Volume

 N/A 7.5 L

Maximum Axial Pulling Load at 6 bar Pressure

 N/A 13 kN

Maximum Stroke

 N/A 16 mm

Minimum Hose Inside Diameter

 N/A 9.5 mm

Weight

 N/A 2.3 kg

For Use With

 N/A M4 to M10 Female Threaded Inserts

Features and Benefits

Features and Benefits

 N/A
  • Automatic stroke from one-position trigger mechanism
  • Mandrel, a hardened socket head cap screw, is easily replaced
  • Production rate increases with auto-reverse after installation
    • Notes for below chart:
    (1) Weight shown with nose piece.
    (2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended.
Product Catalog