Request Information
These Plastic and Metal Cage Nuts are helicoid retaining nuts especially suited for the automotive industry. They are mounted directly on the equipment complete with their screw. The cage is made from Polyamide 66 and the nut is plated steel.
Unit of Measure

Specifications

Fastener Type

 N/A Cage

Screw Size

 N/A M6

Tightening Torque

 N/A 12 N·m8.8 lb·ft

Cage Color

 N/A Natural

Cage Material

 N/A Nylon 66

Nut Color

 N/A Yellow

Nut Finish

 N/A Zinc + Bichromating

Nut Material

 N/A Steel

Panel Mounting Hole Diameter (M)

 N/A 0.637 in16.20 mm

Panel Mounting Hole Diameter (N)

 N/A 0.637 in10.20 mm

Maximum Panel Size (P)

 N/A 0.098 in2.50 mm

Minimum Panel Range P

 N/A 0.027 in0.70 mm

Features and Benefits

Features and Benefits

 N/A Easy Installation:
  • Pre-mount the cage nut on the accessory piece
  • Insert the cage nut into the hole in the substrate
  • Position the assembly
  • As the nut is tightened, it will ascend and turn 90º until it rests against the panel.
Product Catalog