Request Information
These Cylindrical Cage Nuts are designed for front mounting and blind assembly. They can be mounted in compressible materials such as wood, chipboard, and fibro-cement, and can be applied to panel holes made with standard drills or readily available punch and die sets for lower cost tooling.
Unit of Measure

Specifications

Screw Size

 N/A M6

Finish

 N/A Zinc Bi-Chromate

Minimum Panel Size

 N/A 0.027 in0.70 mm

Length

 N/A 0.511 in13.00 mm

Hole Diameter

 N/A 0.255 in12.70 mm

Maximum Panel Size

 N/A 0.157 in4.00 mm

Material

 N/A Steel

Fastener Type

 N/A Cage

Features and Benefits

Features and Benefits

 N/A
  • Easy assembly - Cylindrical Cage Nut is seated in panel hole with light mallet stroke. When adjoining panel component is in position, screw is used to draw captive nut into locked position.
  • Recommended for use with thick sheet metal, in closed boxes or on tubes.

Note

Note

 N/A For optional materials, finishes or assemblies, please contact your EFC Engineering Representative.
Product Catalog