Single Thread U-Nuts for Size 6A and 6B Screws
U-Nuts
Single Thread U-Nuts are used where a full bearing surface on the lower leg is desired. During assembly, these high-performance U-shaped nuts are placed over the edge of a stamped panel, or through a pre-stamped slot. They are then simply pushed until the rear of the fastener locates against the plastic or metal panel edge or snaps into the clearance hole. U-Nuts are self-retained in screw-receiving position to provide simple, rapid attachment of mating panels. They cannot turn as the screw is driven.
Unit of Measure
Items |
/Asset/01659_a_unut_2.jpg 01101037- 0.025 to 0.040 Inch (in) Panel Size Single Thread U-Nut |
/Asset/01659_a_unut_2.jpg 01142028- 0.035 to 0.045 Inch (in) Panel Size Single Thread U-Nut |
/Asset/01659_a_unut_2.jpg 01C73686A 0.040 to 0.055 Inch (in) Panel Size Single Thread U-Nut |
/Asset/01659_a_unut_2.jpg 01066024- 0.062 to 0.094 Inch (in) Panel Size Single Thread U-Nut |
/Asset/01659_a_unut_2.jpg 01086045- 0.062 to 0.094 Inch (in) Panel Size Single Thread U-Nut |
|||||
Description | N/A Single Thread U-Nuts are used where a full bearing surface on the lower leg is desired. During assembly, these high-performance U-shaped nuts are placed over the edge of a stamped panel, or through a pre-stamped slot. They are then simply pushed until the rear of the fastener locates against the plastic or metal panel edge or snaps into the clearance hole. U-Nuts are self-retained in screw-receiving position to provide simple, rapid attachment of mating panels. They cannot turn as the screw is driven. | |||||||||
Overall Length | N/A 0.48 in | N/A 0.47 in | N/A 1.38 in | N/A 0.63 in | N/A 0.600 in | |||||
Screw Size | N/A 6A | |||||||||
Panel Size | N/A 0.025 to 0.040 in | N/A 0.035 to 0.045 in | N/A 0.040 to 0.055 in | N/A 0.062 to 0.094 in | N/A 0.062 to 0.094 in | |||||
Material Thickness (Decimal) | N/A 0.025 in | N/A 0.022 in | N/A 0.025 in | N/A 0.025 in | N/A 0.025 in | |||||
Design Variation | N/A DF | N/A ABF | N/A A | N/A CD | N/A D | |||||
Impression Center to End | N/A 0.21 in | N/A 0.19 in | N/A 0.35 in | N/A 0.32 in | N/A 0.3 in | |||||
Maximum Hole Center to Edge | N/A 0.218 in | N/A 0.265 in | N/A 1 in | N/A 0.296 in | N/A 0.296 in | |||||
Overall Width | N/A 0.5 in | N/A 0.5 in | N/A 0.5 in | N/A 0.44 in | N/A 0.44 in | |||||
Panel Hole Diameter | N/A 0.187 in | N/A 0.141 in | N/A 0.25 in | N/A 0.156 in | N/A 0.25 in | |||||
Applications | N/A U-Nuts can be designed into an automatic clothes washer to secure a solenoid and mounting bracket. | |||||||||
Additional Information | N/A Corrosion presents no problem, as these U-Nuts will not freeze on screw threads. In fact, the U-Nut's impression actually cleans out rust, dirt or paint clots from the screw threads as they are removed. If the part you are looking for is not in the standard matrix below, please contact an EFC International Representative. If your part is not manufactured, EFC engineers can design exactly what you need to satisfy your unique applications. | |||||||||
Features and Benefits |
N/A
|
|||||||||
Note | N/A Please contact EFC International for information. | |||||||||
|