RIV990 and RIV991 Hexcutter Tools allow users to transform round holes to hexagonal holes. This enables a change from standard unified to FM™ full metric inserts.
Request Information
Unit of Measure
Items
RIV990/RIV991 Hexcutter Tools

0.236 Inch (in) Maximum Stroke RIV990 Hexcutter Tool
0.472 Inch (in) Maximum Stroke RIV990/RIV991 Hexcutter Tool

0.472 Inch (in) Maximum Stroke RIV991 Hexcutter Tool
Description N/A RIV990 Hexcutter Tools allow users to transform round holes to hexagonal holes. This enables a change from standard unified to FM™ full metric inserts. N/A RIV991 Hexcutter Tools allow users to transform round holes to hexagonal holes. This enables a change from standard unified to FM™ full metric inserts.
Air Pressure N/A 90 psi6 bar
Air Use Volume N/A 152.6 in³2.5 L
Maximum Axial Pulling Load at 90 Pound Per Square Inch (psi) Pressure N/A 4271 lb
Maximum Axial Pulling Load at 6 bar Pressure N/A 19 kN N/A 21 kN
Maximum Stroke N/A 0.236 in6 mm N/A 0.472 in12 mm
Minimum Hose Size N/A 3/8 in9.5 mm
Tool Weight N/A 5.07 lb2.3 kg N/A 5.29 lb2.4 kg
Features and Benefits N/A The RIV990 cuts hex hole sizes for #8-32 to 5/16 inches and M4 to M8. N/A RIV991 cuts #10-32 to 1/2 inches and M5 to M12 hex hole sizes.
Note N/A Nose pieces for each tool are sold separately.

Notes for below chart:
(1) Tool Weight shown with nose piece.
(2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended.
(3) Tool Weight shown without nose piece. 		N/A Nose pieces for each tool are sold separately.

Notes for below chart:
(1) Tool Weight shown with nose piece.
(2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of pressure regulator is recommended.
(3) Tool Weight shown without nose piece.
Product Catalog