Lay-In Strain Relief Bushings for Split Panel Holes will fit round, flat or multiple cables. Wire range from 0.250 inches up to 0.600 inches. This strain relief secures into a square hole that eliminates rotation.
Request Information
Unit of Measure
Items
Lay-In Strain Relief Bushings for Split Panel Holes

0.875 Inch (in) Mounting Hole Diameter Lay-In Strain Relief Bushing for Split Panel Holes
Lay-In Strain Relief Bushings for Split Panel Holes

0.875 Inch (in) Mounting Hole Diameter Lay-In Strain Relief Bushing for Split Panel Holes
Description N/A Lay-In Strain Relief Bushings for Split Panel Holes will fit round, flat or multiple cables. Wire range from 0.250 inches up to 0.600 inches. This strain relief secures into a square hole that eliminates rotation.
Panel Thickness N/A 0.100 in
Mounting Hole Diameter N/A 0.875 in
Cable Shape N/A Round
Mounting Hole Shape N/A Split Square
Overall Length N/A 0.800 in
Maximum Cable Diameter N/A 0.600 in
Material N/A Nylon 6/6
Color1 N/A White N/A Black
Material Temperature Index2 N/A 125 ºC
Flammability Rating N/A 94V-2
Industry Standards/Certifications N/A Recognized under the Component Program of Underwriters Laboratories File #E-15331 Certified by the Canadian Standards Association File #LR-8919.
Features and Benefits N/A Lay-In Strain Relief Bushings for Split Panel Holes are assembly friendly. Independent of insertion into the chassis, they are self-locking onto the cable. Thus, they may be pre-assembled offline for final assembly at a later time or remote location, for lower installed cost. Protects against forces of pull, push or twist.
  • 1 Please contact your EFC International Representative for further information.
  • 2 Maximum temperature on part not to exceed 105ºC ºC
Product Catalog