Nylon Mounting Brackets for Conduit or Tubing are ideal for mounting flexible conduit or tubing securely into place, vertically or horizontally.
Request Information
Unit of Measure
Items
Nylon Mounting Brackets for Conduit or Tubing

1.240 Inch (in) Inside Diameter Nylon Mounting Black Bracket for Conduit or Tubing
Nylon Mounting Brackets for Conduit or Tubing

1.240 Inch (in) Inside Diameter Nylon Mounting Gray Bracket for Conduit or Tubing
Nylon Mounting Brackets for Conduit or Tubing

0.788 Inch (in) Inside Diameter Nylon Mounting Black Bracket for Conduit or Tubing
Nylon Mounting Brackets for Conduit or Tubing

0.788 Inch (in) Inside Diameter Nylon Mounting Gray Bracket for Conduit or Tubing
Nylon Mounting Brackets for Conduit or Tubing

1.050 Inch (in) Inside Diameter Nylon Mounting Black Bracket for Conduit or Tubing
Description N/A Nylon Mounting Brackets for Conduit or Tubing are ideal for mounting flexible conduit or tubing securely into place, vertically or horizontally.
Type N/A Mounting
Material N/A Nylon 6/6
Color N/A Black N/A Gray N/A Black N/A Gray N/A Black
Temperature Index1 N/A 125 ºC
Inside Diameter N/A 1.240 in31.50 mm N/A 1.240 in31.50 mm N/A 0.788 in20.00 mm N/A 0.788 in20.00 mm N/A 1.050 in26.70 mm
Overall Height N/A 0.840 in21.30 mm N/A 0.840 in21.30 mm N/A 0.710 in18.00 mm N/A 0.710 in18.00 mm N/A 0.670 in17.00 mm
Outside Diameter N/A 1.530 in38.90 mm N/A 1.530 in38.90 mm N/A 1.056 in26.80 mm N/A 1.056 in26.80 mm N/A 1.306 in33.20 mm
Length N/A 1.520 in38.60 mm N/A 1.520 in38.60 mm N/A 1.074 in27.30 mm N/A 1.074 in27.30 mm N/A 1.269 in32.20 mm
Width N/A 19.10 mm0.75 in
Trade Size F N/A 1 in N/A 1 in N/A 1/2 in N/A 1/2 in N/A 3/4 in
Weight N/A 15.5 lb N/A 15.5 lb N/A N/A N/A 15.01 lb
Flammability Rating N/A 94V-2
Features and Benefits N/A
  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. (This feature is not assessed by UL certification and testing.)
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be secured in the panel by the locknut or into an NPT threaded hole.
  • No threading of the conduit or tubing is required to install. This eliminates the possibility of cutting the conduit and creating leak paths.
  • Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • Use of a sealing washer may be required for wet locations Please refer to the "Liquid Tight Sealing Washers" section of this Engineering Guide.
  • Suitable for indoor/outdoor use; for original equipment manufacturers or field installers.
  • Gray connectors provided with assembled O-ring and metal locknuts.
  • Please refer to the "Locknuts" section of this Engineering Guide for locknut dimensions.
  • 1 Maximum Temperature on the part shall not exceed 105ºC.
Product Catalog