Request Information
Nylon Mounting Brackets for Conduit or Tubing are ideal for mounting flexible conduit or tubing securely into place, vertically or horizontally.
Unit of Measure

Specifications

Type

 N/A Mounting

Material

 N/A Nylon 6/6

Color

 N/A Black
Temperature Index1 N/A 125 ºC

Inside Diameter

 N/A 1.050 in26.70 mm

Overall Height

 N/A 0.670 in17.00 mm

Outside Diameter

 N/A 1.306 in33.20 mm

Length

 N/A 1.269 in32.20 mm

Width

 N/A 19.10 mm0.75 in

Trade Size F

 N/A 3/4 in

Weight

 N/A 15.01 lb

Flammability Rating

 N/A 94V-2

Features and Benefits

Features and Benefits

 N/A
  • All nylon construction resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. (This feature is not assessed by UL certification and testing.)
  • No disassembly required. Instead, the installer simply pushes the conduit or tubing onto the ferrule, then tightens the domed sealing nut. This completed assembly can then be secured in the panel by the locknut or into an NPT threaded hole.
  • No threading of the conduit or tubing is required to install. This eliminates the possibility of cutting the conduit and creating leak paths.
  • Conduit will not wind tight onto the connector during assembly and can be easily removed by pulling while turning in a clockwise direction.
  • Use of a sealing washer may be required for wet locations Please refer to the "Liquid Tight Sealing Washers" section of this Engineering Guide.
  • Suitable for indoor/outdoor use; for original equipment manufacturers or field installers.
  • Gray connectors provided with assembled O-ring and metal locknuts.
  • Please refer to the "Locknuts" section of this Engineering Guide for locknut dimensions.
  • 1 Maximum Temperature on the part shall not exceed 105ºC.
Product Catalog