Self-Clinching Nuts provide strong load-bearing threads in stainless sheet metal as thin as 0.030 inches (0.8mm). All self-clinching fasteners install into a round hole, which may be punched or drilled in ductile materials. They provide a permanently attached fastener, which becomes an integral part of the panel or frame and eliminates the problems associated with loose hardware. Self-Clinching fasteners provide added value by speeding initial assembly as well as servicing in the field, keeping costs to a minimum.
Unit of Measure
Specifications
Thread Size |
N/A M5 x 0.8 |
Dimension C |
N/A 2.00 mm |
Maximum Dimension A |
N/A 0.76 in |
Hole Diameter |
N/A 6.4 mm |
Dimension D |
N/A 8.7 mm |
Minimum Panel Thickness |
N/A 0.8 to 1 mm |
Maximum Dimension B |
N/A 6.38 mm |
Minimum Center of Hole to Edge of Panel |
N/A 7.1 mm |
Features and Benefits
Features and Benefits |
N/A Self-clinching fasteners are pressed into holes in sheet metal by applying a steady squeezing force. This results in the cold-flow of sheet material, which is displaced by the knurl, into the undercut area on the shank of the fastener. Once fully embedded, the knurled area prevents torque-out during tightening of mating part. |
