Self-Clinching Nuts provide strong load-bearing threads in stainless sheet metal as thin as 0.030 inches (0.8mm). All self-clinching fasteners install into a round hole, which may be punched or drilled in ductile materials. They provide a permanently attached fastener, which becomes an integral part of the panel or frame and eliminates the problems associated with loose hardware. Self-Clinching fasteners provide added value by speeding initial assembly as well as servicing in the field, keeping costs to a minimum.
Unit of Measure
Specifications
Thread Size |
N/A 1/4-20 |
Dimension C |
N/A 0.170 in |
Maximum Dimension A |
N/A 0.054 in |
Hole Diameter |
N/A 0.344 in |
Dimension D |
N/A 0.44 in |
Minimum Panel Thickness |
N/A 0.056 in |
Maximum Dimension B |
N/A 0.343 in |
Minimum Center of Hole to Edge of Panel |
N/A 0.34 in |
Features and Benefits
Features and Benefits |
N/A Self-clinching fasteners are pressed into holes in sheet metal by applying a steady squeezing force. This results in the cold-flow of sheet material, which is displaced by the knurl, into the undercut area on the shank of the fastener. Once fully embedded, the knurled area prevents torque-out during tightening of mating part. |
