Request Information
These Double Tube Routing Clamps hold two tubes of the same diameters, and have 2 Bolt Holes. These are available with or without vinyl plastisol (PVC) cushioning, which fully encloses the metal and can not come off during assembly or in service.
Unit of Measure

Specifications

Finish

 N/A Galvanized G90

Hole Center to End

 N/A 0.500 in

Hole Center to End Tolerance (±)

 N/A 0.015 in

Width Tolerance (±)

 N/A 0.10 in

Gage (G)

 N/A 0.032 in

Hole Diameter

 N/A 0.468 in

Hole Diameter Tolerance (±)

 N/A 0.005 in

Gap

 N/A 0.062 in

Gap Tolerance (±)

 N/A 0.31 in

Tube Diameter

 N/A 0.437 in

Slot Length

 N/A 0.562 in

Slot Length Tolerance (±)

 N/A 0.020 in

Print Reference

 N/A 0.781 in

Material

Material

 N/A
  • Hot Dipped Galvanized Steel, CChem Treated G90
  • CRCQ Steel, 0.0002 min. Zinc with Clear Chromate
  • CRCQ Steel, 0.00015 min. Zinc with Yellow Dichromate
  • CRCQ Steel, 0.0002 min Zinc with Yellow Dichromate

Features and Benefits

Features and Benefits

 N/A Double Tube Routing Clamps with 2 Bolt Holes can be special ordered to accommodate 2 tubes of differing diameters, or more than 2 tubes of the same or differing diameters.

Note

Note

 N/A Inspection Note: Ends of legs may not line up if clamp is closed around non-rigid tubing or hose. For inspection, close around a hard mandrel.
Product Catalog