Cable Tie and Edge Clip Assemblies route bundles of wires securing them to the edge of a plastic or metal sheet. With this assembly, there is no need for a mounting hole. The clip easily secures to the panel edge and offers a high extraction force because of the integrated metal clamp that keeps this assembly in place.
Unit of Measure
Specifications
Type |
N/A T50SOSEC9 |
Tensile Strength |
N/A 50 lb225 N |
Panel Thickness |
N/A 0.039 to 0.117 in1 to 3 mm |
Style |
N/A E |
Length |
N/A 5.9 in150 mm |
Bundle Diameter |
N/A 1.2 in31 mm |
Maximum Bundle Diameter (Decimal) |
N/A 1.2 in31 mm |
Cable Tie
Cable Tie Flammability Rating |
N/A Underwriters Laboratories (UL94 HB) Underwriters Laboratories (UL94 V2) |
Cable Tie Operating Continuous Temperature |
N/A -40 to +221 ºF-40 to +105 ºC |
Cable Tie Material |
N/A Polyamide (PA66HS) (Heat Stabilized Polyamide (PA 6.6)) |
Edge Clip
Edge Clip Material |
N/A PA66HIRHS (Impact Modified, Heat Stabilized Polyamide (PA 6.6)) Ultraviolet (UV) Resistant |
Edge Clip Color |
N/A Black |
Edge Clip Operating Continuous Temperature |
N/A -40 to +230 ºF-40 to +110 ºC |
Features and Benefits
Features and Benefits |
N/A Edge Clips are available as a two piece clip and tie assembly with a minimum tensile strength of 50 lbs (225 N). Two other configurations are available: a one piece clip and tie combination and an edge clip and tape bar combination. Outside serrated cable tie may be available for reduced bundle chafing. Please contact an EFC Representative for more information. |
