Request Information
Quick Release, Push-Turn Fasteners from Camloc® provide a vibration resistant joining solution for quick and repetitive attachment and removal of panels with minimum effort owing to their quick release push-turn fastening mechanisms. The CAM-PT10 Series of Push-Turn Fasteners lends itself to applications where easy access is required through removal and re-attachment of panels, covers or other components.
Unit of Measure

Specifications

Temperature

 N/A -20 to +70 ºC

Maximum Tensile Strength

 N/A 1.200 N

Working Load

 N/A 800 N

Features and Benefits

Features and Benefits

 N/A
  • Grip range up to 7.5 times wider than similar products
    • Accommodates a wide variation of joint thicknesses
    • Compensates for material/plating tolerance variation
  • Fasteners can be locked and unlocked in a matter of seconds - saving time and reducing costs.
  • Requires 1/4 turn to open and closes by a push of the finger.
  • Wing head and combi-slot heads enable use by hand or tool.
  • All components are easy to install with no tooling required.
To select your 717F Series Push-Turn Fastener:
  1. Choose stud assembly according to Panel Thickness P and spring clip according to Frame Thickness F
  2. Select compensating and retaining washers
  3. Using the formula from the images labeled Determining the Stud Length Number, Stud Length Table and How to Determine the Part Number, select the stud length number from Panel Thickness P.

Additional Information

Additional Information

 N/A The CAM-PT10 Series features:
  • Wide grip range
  • 1/4 turn to open closes by a push of the finger
  • Fast installation of snap-in spring receptacle. No tools needed to install.
  • Tool or hand operated.
  • Tool operated stud has combination recess.
The Push-Turn CAM-PT10 Series offers a wide range of sizes to fit your applications. Receptacles for this series are the same as those shown with the 716F Series. For additional information, contact an EFC Representative.
Product Catalog