Decorative Hammer-Style Cap Nuts push on to attach wheels to axels or to provide a finished look for the ends of tubes.
Unit of Measure
Specifications
Stud Diameter |
N/A 0.500 in12.70 mm |
Cap Diameter |
N/A 7/8 in22.2 mm |
Cap Height |
N/A 0.390 in9.9 mm |
Retention |
N/A 1200 lb |
Material |
N/A Assembled 1010 Low Carbon and 1050 High Carbon Steel Strip |
Style |
N/A Decorative Hammer |
Finish |
N/A Bright Barrel Nickel |
Weight |
N/A 4.48 lb |
Features and Benefits
Features and Benefits |
N/A
These Cap Nuts are used for attaching wheels or other parts to axles or studs and for decorative finishing of wheel attachments. Retention values are average and are based on tests utilizing mild CRS studs of hardness Rockwell B80 maximum and varying ±0.002 in (0.05mm) in diameter from that specified. Tolerances on dimensions tabulated above are ±1/64 in (0.40mm). Applications studs should be round and have ends free from burrs before assembly with ratchet plates. Uncapped fastener (ratchet plate) is available upon request. |
