Adhesive Mounting Pads mate with cable ties starting at 18 lb tensile strength. The mounts listed are supplied "Two-up" meaning that there are 2 mounts per adhesive pad. This feature reduces installation time as you can simply grasp the mount and pull it off the tape and stick them on your product. There is no fumbling trying to peel off the backing. These parts are also offered with a screw mount center hole.
Unit of Measure
Specifications
Material |
N/A Nylon 6/6 |
Color |
N/A Natural |
Mounting Method |
N/A Synthetic Polymer |
For Use With |
N/A 18 to 40 lb Cable Ties |
Length |
N/A 0.750 in19.04 mm |
Width |
N/A 0.75 in19.04 mm |
Height |
N/A 0.205 in5.21 mm |
Slot Height |
N/A 0.050 in1.27 mm |
Slot Width |
N/A 0.140 in3.18 mm |
Underwriters Laboratories (UL) Flammability Rating |
N/A 94V-2 (Clip) |
Weight |
N/A 0.74 lb |
Features and Benefits
Features and Benefits |
N/A Our one-piece solution to your cable mounting requirements is the adhesive mount pad. You can apply the mount on your product and then have the wire or cable bundle attached in a different area of your production line or you can bundle the wire or cable and add the mount all in one area. There are two different adhesives available - synthetic polymer that is a rubber based product and closed cell foam acrylic. The acrylic adhesive parts are supplied one piece per pad. |
