The RIV916 Pull-to-Stroke for Plus+Tite® Inserts offers a long stroke to easily install the straight shank and pre-bulbed Plus+Tite® fasteners.
Request Information
Unit of Measure
Items
The RIV916 Pull-to-Stroke Tools for Plus+Tite® Inserts

Unified Thread Type RIV916 Pull-to-Stroke Tool for Plus+Tite® Inserts
The RIV916 Pull-to-Stroke Tools for Plus+Tite® Inserts

Metric Thread Type RIV916 Pull-to-Stroke Tool for Plus+Tite® Inserts
The RIV916 Pull-to-Stroke Tools for Plus+Tite® Inserts

RIV916 Pull-to-Stroke Tool for Plus+Tite® Inserts
Description N/A The RIV916 Pull-to-Stroke for Plus+Tite® Inserts offers a long stroke to easily install the straight shank and pre-bulbed Plus+Tite® fasteners.
Thread Type N/A Unified N/A Metric N/A Tool Only
Air Pressure N/A 90 psi N/A 6 bar N/A
Air Use Volume N/A 457.5 in³ N/A 7.5 L N/A
Maximum Axial Pulling Load at 90 Pound Per Square Inch (psi) Pressure N/A 2923 lb N/A N/A
Maximum Axial Pulling Load at 6 bar Pressure N/A N/A 13 kN N/A
Maximum Stroke N/A 0.630 in N/A 16 mm N/A
Minimum Hose Inside Diameter N/A 0.375 in N/A 9.5 mm N/A
Weight N/A 5 lb N/A 2.3 kg N/A
For Use With N/A 10 to 3/8 in Female Threaded Inserts N/A M4 to M10 Female Threaded Inserts N/A
Features and Benefits N/A
  • Automatic stroke from one-position trigger mechanism
  • Mandrel, a hardened socket head cap screw, is easily replaced
  • Production rate increases with auto-reverse after installation
    • Notes for below chart:
    (1) Weight shown with nose piece.
    (2) Dynamic air pressure for unified tool is 70 to 100 PSI and 5 to 7 BAR for the metric tool. Do not exceed these values or tool can be damaged. The use of a pressure regulator is recommended.
Note N/A N/A N/A Nose Piece Sold Separately
Product Catalog