EFC International - Pull Tab Vinyl Plastic Caps

Pull Tab Vinyl Plastic Caps offer excellent protection from moisture and contaminates. With sizes to fit 3/16" to 1-1/8" diameters, they stretch just enough to form for a secure fit and will not fall off during shipment. An ergonomic design makes these vinyl caps easy to remove from your part. Pull Tab Vinyl Caps can be produced in various colors, wall thicknesses, hardness durometers and lengths.

Request Information

Unit of Measure

Items	04MFPT9617 4.7 Inch (in) Inside Diameter Pull Tab Vinyl Plastic Cap	04MFPT9618 5.5 Inch (in) Inside Diameter Pull Tab Vinyl Plastic Cap	04MFPT9619 6.0 Inch (in) Inside Diameter Pull Tab Vinyl Plastic Cap	04MFPT9620 6.4 Inch (in) Inside Diameter Pull Tab Vinyl Plastic Cap	04MFPT9406 8.0 Inch (in) Inside Diameter Pull Tab Vinyl Plastic Cap
Description	N/A Pull Tab Vinyl Plastic Caps offer excellent protection from moisture and contaminates. With sizes to fit 3/16" to 1-1/8" diameters, they stretch just enough to form for a secure fit and will not fall off during shipment. An ergonomic design makes these vinyl caps easy to remove from your part. Pull Tab Vinyl Caps can be produced in various colors, wall thicknesses, hardness durometers and lengths.
Material	N/A Vinyl
Inside Diameter	N/A 0.187 mm4.7 in	N/A 0.215 mm5.5 in	N/A 0.236 mm6.0 in	N/A 0.250 mm6.4 in	N/A 0.313 mm8.0 in
Minimum Inside Length	N/A 0.25 in6.4 mm
Maximum Inside Length	N/A 1.000 in25.4 mm	N/A 1.000 in25.4 mm	N/A 1.000 in25.4 mm	N/A 1.000 in25.4 mm	N/A 1.5 in38.1 mm
Wall Thickness	N/A 0.038 in1.0 mm
Tab Height	N/A 0.500 in12.7 mm	N/A 0.500 in12.7 mm	N/A 0.500 in12.7 mm	N/A 0.500 in12.7 mm	N/A 0.655 in16.6 mm
Color	N/A Wide Selection Available
Features and Benefits	N/A Flexible Yet Durable - Won't Split, Tear or Shred Flat / Ergonomic Tab for Easy Removal Stretches for a Snug Fit with no splitting, tearing or shredding Vinyl plastic pull tab caps are often used as inexpensive and disposable, single-use masking caps for painting and coating processes under 300 ºF. The pull tab end makes removal easy. For higher temperatures, they can also be produced in High Temperature Vinyl.
Note	N/A Please contact an EFC Representative. Wall thickness is measured approximately 1/4" (6.35mm) from open end and increases slightly toward the closed end of the cap.