Heavy Duty Routing Clamps - Furnished Closed are made for applications that require a heavier or wider steel material.
Request Information
Unit of Measure
Items
Heavy Duty Routing Clamps

0.406 Inch (in) Hole Diameter Heavy Duty Routing Clamp
Heavy Duty Routing Clamps

0.343 Inch (in) Hole Diameter Heavy Duty Routing Clamp
Heavy Duty Routing Clamps

0.343 Inch (in) Hole Diameter Heavy Duty Routing Clamp
Heavy Duty Routing Clamps

0.281 Inch (in) Hole Diameter Heavy Duty Routing Clamp
Heavy Duty Routing Clamps

0.343 Inch (in) Hole Diameter Heavy Duty Routing Clamp
Description N/A Heavy Duty Routing Clamps - Furnished Closed are made for applications that require a heavier or wider steel material.
Hole Center to End N/A 0.375 in N/A 0.312 in N/A 0.312 in N/A 0.250 in N/A 0.312 in
Hole Diameter N/A 0.406 in N/A 0.343 in N/A 0.343 in N/A 0.281 in N/A 0.343 in
Hole Diameter Tolerance (±) N/A 0.001 in
Width N/A 0.75 in N/A 0.625 in N/A 0.75 in N/A 0.625 in N/A 0.625 in
Thickness (Decimal) N/A 0.060 in N/A 0.320 in N/A 0.060 in N/A 0.320 in N/A 0.320 in
Diameter Tolerance N/A 0.015 in
Center to Center Length N/A 0.968 in N/A 0.656 in N/A 1.250 in N/A 0.531 in N/A 0.594 in
Center to Center Tolerance (±) N/A 0.031 in
Clamp Diameter N/A 0.687 in N/A 0.375 in N/A 1.187 in N/A 0.250 in N/A 0.250 in
Clamp Diameter Tolerance (±) N/A 0.31 in
Gap N/A 0.062 in N/A 0.062 in N/A 0.093 in N/A 0.062 in N/A 0.062 in
Gap Tolerance (±) N/A 0.31 in
Hole Center to End Tolerance (±) N/A 0.015 in
Width Tolerance (±) N/A 0.010 in
Material N/A Cold Rolled Commercial Quality (CRCQ) Steel N/A Heavy Duty Galvanized Steel N/A Cold Rolled Commercial Quality (CRCQ) Steel N/A Cold Rolled Commercial Quality (CRCQ) Steel N/A Cold Rolled Commercial Quality (CRCQ) Steel
Finish N/A Zinc Trivalent Chromate N/A G90 Galvanized N/A Zinc Trivalent Chromate N/A Zinc Trivalent Chromate N/A Zinc Trivalent Chromate
Features and Benefits N/A Heavier, wider steel for heavy duty applications. Single tube, two bolt holes. Clamps Are Formed Closed - Natural Spring Back Allowed.
Note N/A If opening is necessary for assembly, a closed clamp furnished open should normally be used.
Product Catalog