These Double Tube Routing Clamps hold two tubes of the same diameters, and have 2 Bolt Holes. These are available with or without vinyl plastisol (PVC) cushioning, which fully encloses the metal and can not come off during assembly or in service.
Request Information
Unit of Measure
Items
Double Tube Routing Clamps

0.203 Inch (in) Hole Diameter Double Tube Routing Clamp
Double Tube Routing Clamps

0.281 Inch (in) Hole Diameter Double Tube Routing Clamp
Double Tube Routing Clamps

0.343 Inch (in) Hole Diameter Double Tube Routing Clamp
Double Tube Routing Clamps

0.406 Inch (in) Hole Diameter Double Tube Routing Clamp
Double Tube Routing Clamps

0.203 Inch (in) Hole Diameter Double Tube Routing Clamp
Description N/A These Double Tube Routing Clamps hold two tubes of the same diameters, and have 2 Bolt Holes. These are available with or without vinyl plastisol (PVC) cushioning, which fully encloses the metal and can not come off during assembly or in service.
Finish N/A Galvanized G90
Hole Center to End N/A 0.218 in N/A 0.312 in N/A 0.375 in N/A 0.437 in N/A 0.218 in
Hole Center to End Tolerance (±) N/A 0.015 in
Width Tolerance (±) N/A 0.10 in
Gage (G) N/A 0.032 in
Hole Diameter N/A 0.203 in N/A 0.281 in N/A 0.343 in N/A 0.406 in N/A 0.203 in
Hole Diameter Tolerance (±) N/A 0.005 in
Gap N/A 0.031 in
Gap Tolerance (±) N/A 0.31 in
Tube Diameter N/A 0.187 in N/A 0.187 in N/A 0.187 in N/A 0.187 in N/A 0.250 in
Slot Length N/A 0.203 in N/A 0.375 in N/A 0.437 in N/A 0.500 in N/A 0.203 in
Slot Length Tolerance (±) N/A 0.020 in
Print Reference N/A 0.437 in N/A 0.468 in N/A 0.531 in N/A 0.593 in N/A 0.468 in
Material N/A
  • Hot Dipped Galvanized Steel, CChem Treated G90
  • CRCQ Steel, 0.0002 min. Zinc with Clear Chromate
  • CRCQ Steel, 0.00015 min. Zinc with Yellow Dichromate
  • CRCQ Steel, 0.0002 min Zinc with Yellow Dichromate
Features and Benefits N/A Double Tube Routing Clamps with 2 Bolt Holes can be special ordered to accommodate 2 tubes of differing diameters, or more than 2 tubes of the same or differing diameters.
Note N/A Inspection Note: Ends of legs may not line up if clamp is closed around non-rigid tubing or hose. For inspection, close around a hard mandrel.
Product Catalog