These Double Tube Cushioned Routing Clamps hold two tubes of the same diameters, and have 2 Bolt Holes. These are available with or without vinyl plastisol (PVC) cushioning, which fully encloses the metal and can not come off during assembly or in service.
Request Information
Unit of Measure
Items
Multi-Tube Furnished Closed Cushioned Clamps

0.203 Inch (in) Hole Diameter Multi-Tube Furnished Closed Cushioned Clamp
Multi-Tube Furnished Closed Cushioned Clamps

0.281 Inch (in) Hole Diameter Multi-Tube Furnished Closed Cushioned Clamp
Multi-Tube Furnished Closed Cushioned Clamps

0.343 Inch (in) Hole Diameter Multi-Tube Furnished Closed Cushioned Clamp
Multi-Tube Furnished Closed Cushioned Clamps

0.406 Inch (in) Hole Diameter Multi-Tube Furnished Closed Cushioned Clamp
Multi-Tube Furnished Closed Cushioned Clamps

0.203 Inch (in) Hole Diameter Multi-Tube Furnished Closed Cushioned Clamp
Description N/A These Double Tube Cushioned Routing Clamps hold two tubes of the same diameters, and have 2 Bolt Holes. These are available with or without vinyl plastisol (PVC) cushioning, which fully encloses the metal and can not come off during assembly or in service.
Cushion Color N/A Black
Cushion Material N/A Vinyl, 1/32" Thick, applied by dipping, fully encloses the metal and cannot come off during assembly or in service.
Hole Center to End N/A 0.218 in N/A 0.312 in N/A 0.375 in N/A 0.437 in N/A 0.218 in
Hole Center to End Tolerance (±) N/A 0.015 in
Width Tolerance (±) N/A 0.10 in
Gage (G) N/A 0.032 in
Hole Diameter N/A 0.203 in N/A 0.281 in N/A 0.343 in N/A 0.406 in N/A 0.203 in
Hole Diameter Tolerance (±) N/A 0.005 in
Gap N/A 0.031 in
Gap Tolerance (±) N/A 0.31 in
Tube Diameter N/A 0.187 in N/A 0.187 in N/A 0.187 in N/A 0.187 in N/A 0.250 in
Slot Center to End Tolerance (±) N/A 0.015 in N/A N/A N/A N/A
Slot Length N/A 0.203 in N/A 0.375 in N/A 0.437 in N/A 0.500 in N/A 0.203 in
Slot Length Tolerance (±) N/A 0.020 in
Print Reference N/A 0.468 in N/A 0.500 in N/A 0.562 in N/A 0.625 in N/A 0.500 in
Material N/A
  • HD Galvanized Steel, Chemically-Treated G90, Per ASTM A653/A653M
  • CRCQ Steel, 0.0002 min Zinc with Clear Chromate
Weight N/A 1.27 lb N/A 1.3 lb N/A 1.75 lb N/A 2.23 lb N/A 1.43 lb
Features and Benefits N/A Double Tube Routing Clamps with 2 Bolt Holes can be special ordered to accommodate 2 tubes of differing diameters, or more than 2 tubes of the same or differing diameters.

Parts listed below are of HD Galvanized Steel, CChem-Treated G90, per ASTM A653/A653M . For ordering alternate options, please contact your EFC International Representative.

Inspection note: Ends of legs may not line up if clamp is closed around non-rigid tubing or hose. For inspection, close around a hard mandrel.
Product Catalog