UNICLAMPS™ are spring-action hose clamps providing constant leak proof security for low pressure applications. UNICLAMPS™ offer improved clamping action without damaging your hoses, and are a low cost solution for high volume production.

Constant Tension Band Clamps are one-piece, self-adjusting 12mm spring band clamps made from modified Ck75, in nominal diameters from 13 to 80mm in different gradations. They provide a quick, secure and maintenance-free connection for hoses which are subjected to large fluctuations in temperature or which tend to "slip away" under the pressure of the clamp. Their band edges are rounded for hose protection, and for additional protection against corrosion they are also available with or without organic/inorganic coating.

The Space Saver SBC (Spring Band Clamp) is a self-adjusting, low profile sealing component which provides a nearly constant clamping force over a wide range of operating temperatures and pressures. The Space Saver's nearly constant clamping force insures a leak proof joint over a wide range of operating conditions. In addition, the shortened assembly endings for the Space Saver SBC make it suitable for tight installation spaces.

Constant Tension Bands are the ideal fasteners for hose-spigot connections which are submitted to extreme temperature changes, or which tend to "slip away" under pressure of the clamp. This version is a space-saving clamp designed to realize the technical minimum overall height to allow its use in difficult assembly situations. These spring band clamps are quick to assemble and easy to install. Their integrated spring retaining mechanism provides a continuously readjusting dynamic tightening effect. They are available in 12mm band width and will accommodate nominal diameters from 13 up to 80 mm.

Spring Band Clamps are self-tightening, sealing elements made from tempered spring band steel offering a high level of flexibility to ensure reliable, leak proof connection of a hose to a fitting

• Re-torque and re-adjustment are not required after installation.
• Maintains constant tension throughout all pressure and fluid systems of almost any application.
• Leak-proof solution for applications, ranging from -40ºF - 392ºF

The standard Spring Band Clamp can be installed with pliers. Other tools specifically designed for the safe and efficient installation of the Standard Spring Band Clamp are also available.

Spring Band Clamps are self-tightening, sealing elements made from tempered spring band steel offering a high level of flexibility to ensure reliable, leak proof connection of a hose to a fitting.

• Re-torque and re-adjustment are not required after installation.
• Maintains constant tension throughout all pressure and fluid systems of almost any application.
• Leak-proof solution for applications, ranging from -40ºF - 392ºF

Spring Band Clamps are self-tightening, sealing elements made from tempered spring band steel offering a high level of flexibility to ensure reliable, leak proof connection of a hose to a fitting.

• Re-torque and re-adjustment are not required after installation.
• Maintains constant tension throughout all pressure and fluid systems of almost any application
• Leak-proof solution for applications, ranging from -40ºF - 392ºF

Spring Band Clamps are self-tightening, sealing elements made from tempered spring band steel offering a high level of flexibility to ensure reliable, leak proof connection of a hose to a fitting.

• Re-torque and re-adjustment are not required after installation.
• Maintains constant tension throughout all pressure and fluid systems of almost any application
• Leak-proof solution for applications, ranging from -40ºF - 392ºF

This is a unique, patented version of a Pre-Opened, Pre-positioned Constant Tension Band hose clamp. Reduce your cost, improve your efficiency. Please contact your EFC International representative for available size information.

Torro® Worm Gear Clamps with Integrated Springs add an automatic self-adjusting constant tension to the 9 or 12mm asymmetric worm drive clamp. Tightening the screw loads the spring with enough clamping force to ensure a long-lasting automatic re-tensioning effect, even in very low temperatures. The self-adjusting radial clamping force achieved makes these ideal for applications under extreme temperature changes (e. g. charged air) or for the retention of hoses with a tendency of "creeping" (hose relaxation). They are particularly suited to connecting cooling and heating hoses.

Assembly Tools for Spring Band Clamps are designed to enable fast and effortless fitting of the clamps in a variety of applications. These Pliers for Spring Band Clamps help ensure maximum security and reliability for your requirements.

These handheld pliers are designed specifically to install UNICLAMP™ HOSE CLAMPS.

Pre-Opened Constant Tension Bands are the ideal fasteners for hose-spigot connections which are subject to extreme temperature changes, or which tend to "slip away" under pressure of the clamp. This version is secured by a small plastic clip. After slipping the clamp onto the hose, this clip can be easily removed by hand. Pre-opened, (and if desired, pre-positioned on the hose) these spring band clamps are quick to assemble and easy to install. Their integrated spring retaining mechanism provides a continuously readjusting dynamic tightening effect. They are available in band widths of 12 and 15 mm and will accommodate nominal diameters from 13 up to 80 mm.

Pre-Opened Constant Tension Bands are the ideal fasteners for hose-spigot connections which are subject to extreme temperature changes, or which tend to "slip away" under pressure of the clamp. This version is secured by a small plastic clip. After slipping the clamp onto the hose, this clip can be easily removed by hand. Pre-opened, these spring band clamps are quick to assemble and easy to install. Their integrated spring retaining mechanism provides a continuously readjusting dynamic tightening effect. They are available in band widths of 12 and 15 mm and will accommodate nominal diameters from 13 up to 80 mm.